74
Child restraint systems
9 . Before having a child sit in the child restraint system , try to move it back and forth and right and left to check if it is firmly secured . Sometimes a child restraint system can be more firmly secured by pushing it down into the seat cushion and then tightening the seatbelt . It should not be possible to move the child restraint system more than 1 in ( 2.5 cm ) in any direction along the seatbelt path .
10 . Pull at the shoulder portion of the belt to confirm that it cannot be pulled out ( ALR properly functioning ).
11 . Latch the top tether hook onto the top tether anchorage that is located behind the second-row and third-row seat and tighten the top tether firmly . For additional instructions , refer to “ Top tether anchorages ” FP81 . – If the child restraint system is installed with the head restraint left in place , pass the top tether hook between the head restraint stays .
12 . To remove the child restraint system , press the release button on the seatbelt buckle and allow the belt to retract completely . The belt will return to the ELR mode .
NOTE
When the child restraint system is no longer in use , remove it and restore the ELR function of the retractor . That function is restored by allowing the seatbelt to retract fully .