Seats 47 |
& Head restraints |
S01AQ04 |
! Height adjustment |
S01AQ040101 |
||
|
WARNING
Do not change the head restraint to the head restraint from a different seat . The head restraints were each designed specifically for the front seat , second-row seat , and third-row seat .
NOTE
It is possible to adjust the angle of the front seat head restraints only . When installing the front seat head restraints , make sure that the angle of the head restraints can be adjusted .
! Front seats
S01AQ0401
Both the driver ’ s seat and the front passenger ’ s seat are equipped with head restraints . Both head restraints are adjustable in the following ways .
|
1 Head restraint 2 Release button
To raise : Pull the head restraint up . To lower :
Push the head restraint down while pressing the release button on the top of the seatback .
To remove :
While pressing the release button , pull out the head restraint .
To install :
Install the head restraint into the holes that are located on the top of the seatback until the head restraint locks . Press and hold the release button to lower the head restraint .
|
Each head restraint should be adjusted so that the center of the head restraint is closest to the top of the occupant ’ s ears .
NOTE
When the head restraint cannot be pulled out or installed due to insufficient clearance between the head restraint and the roof , tilt the seat and then perform the installation and removal tasks .
|
Seat , seatbelt and SRS airbags |
||||||||
– CONTINUED – |
|||||||||||