516
Replacing key battery
& Cargo area light
S11BE11
1 . Remove the lens by prying the edge of the lens with a flat-head screwdriver .
2 . Pull the bulb out of the socket . 3 . Install a new bulb . 4 . Reinstall the lens .
& Other bulbs
S11BE29
It may be difficult to replace the bulbs . Have the bulbs replaced by your SUBARU dealer if necessary .
11-23 . Replacing key battery
S11BK
The access key fob / transmitter battery may be discharged under the following conditions .
. The operation of the keyless access function is unstable .
. The operating distance of the remote keyless entry system is unstable .
. The transmitter does not operate properly when used within the standard distance .
Replace the battery with a new one .
& Safety precautions CAUTION
S11BK04
. Do not let dust , oil or water get on or in the access key fob / transmitter when replacing the battery .
. Before replacing the battery , remove any static electricity .
. Be careful not to touch or damage the printed circuit board in the access key fob / transmitter when replacing the battery .
. Be careful not to allow children to touch the battery and any removed parts ; children could swallow them .
. There is a danger of an explosion if the battery is incorrectly replaced . Replace only with the same or equivalent type of the battery .
. Batteries should not be exposed to excessive heat such as bright sunlight , fire or the like .
NOTE
. Replace only with the same or equivalent type of battery recommended by the manufacturer .
. Dispose of used batteries according to local laws .
. Mount the battery in the correct orientation to prevent fluid leakage . Be careful not to bend the terminals . It may result in a malfunction .
. It is recommended that the battery be replaced by a SUBARU dealer . . Use a new battery . . After replacing the battery , confirm that the transmitter functions properly .