Alloy wheels 503 |
||||
|
WARNING
Use only those wheels that are specified for your vehicle . Wheels not meeting specifications could interfere with brake caliper operation and may cause the tires to rub against the wheel well housing during turns . The resulting loss of vehicle control could lead to an accident .
NOTE
When any of the wheels are removed and replaced for tire rotation or for any other reason , always check the tightness of the wheel nuts after driving approximately 600 miles ( 1,000 km ). If any nut is loose , tighten it to the specified torque .
|
11-16 . Alloy wheels
S11BM
Alloy wheels can be scratched and damaged easily . Handle them carefully to maintain their appearance , performance , and safety .
. When any of the wheels are removed and replaced for tire rotation or to change a flat tire , always check the tightness of the wheel nuts after driving approximately 600 miles ( 1,000 km ). If any nut is loose , tighten it to the specified torque .
. Never apply oil to the threaded parts , wheel nuts , or tapered surface of the wheel .
. Never let the wheel rub against sharp protrusions or curbs .
. When wheel nuts , balance weights , or the center cap are replaced , be sure to replace them with genuine SUBARU parts designed for alloy wheels .
. When stacking and storing removed tires , place shock-absorbing material between the tires to protect the wheels from becoming scratched .
|
11-17 . Windshield washer fluid |
S11AX
When there is only a small amount of washer fluid remaining , the windshield washer fluid warning light will illuminate . When this occurs , refill the washer fluid .
|
Maintenance and service |
– CONTINUED – |