Towing 461
After towing , remove the towing hook from the vehicle and stow it in the tool bucket .
Fit the towing hook cover on the bumper .
WARNING
! Front tie-down hooks
S09AF0106
3 . Screw the towing hook into the thread hole until its thread can no longer be seen .
4 . Tighten the towing hook securely using the jack handle and wheel nut wrench .
. Do not use the towing hook for purposes other than towing your vehicle .
. Be sure to remove the towing hook after towing . Leaving the towing hook mounted on the vehicle could interfere with proper operation of the fuel pump shut off function when the vehicle is struck from behind .
CAUTION
To prevent deformation to the bumper and the towing hook , do not apply an excessive load to the towing hook .
The front tie-down hooks are located between each of the front tires and the front bumper .
In case of emergency
– CONTINUED –