38
Seats
NOTE
. The outside mirror angle will return to its original position approximately 9 seconds after the select lever is moved to any position other than “ R ” position .
. The factory setting ( default setting ) for this function is set as the front passenger ’ s side mirror . The setting of the driver ’ s side mirror operation can be changed by a SUBARU dealer . Contact your SUBARU dealer for details .
. The system stores the adjusted mirror angle for approximately 45 seconds after the ignition switch is turned to the “ OFF ” position . Register the mirror angle while the memory function is available .
! Utilizing of memory position registered with button “ 1 ” or “ 2 ”
S01AQ060303
WARNING
Be sure to press the correct button to retrieve your registered memory position . If the seat position is not optimum for you , it may adversely affect your driving and may reduce the effectiveness of the seatbelt . That could result in an accident involving serious injury or death .
1 . Turn the ignition switch to the “ ON ” position .
2 . Put the select lever is in the “ P ” position and apply the parking brake . Then press button “ 1 ” or “ 2 ”.
A chirp will sound and the seat and angle of the outside mirrors moves to the registered position .
When the select lever is moved to the “ R ” position , the outside mirror will move to the registered reverse tilt-down position .
NOTE
. If the vehicle battery is removed , the registered memory position data will not be deleted .
. When the button “ 1 ” or “ 2 ” is pressed within 45 seconds after the driver ’ s door is opened , the registered memory position can be retrieved even if the ignition switch is in the “ LOCK ” or “ OFF ” position .
. If buttons “ 1 ” and “ 2 ” are pressed at the same time , execution of seat position retrieval may not be possible .
. When the retrieved position is the same as the current seat position , a chirp will sound twice .
! Utilizing of the seat position registered with access key fob
S01AQ060304
1 . Hold the registered access key fob .
2 . Unlock the driver ’ s door by pressing the “ ” button or gripping the door