36
Seats
control switch .
Register the seat position with button “ 1 ” or “ 2 ” or each of the key fobs .
The following memory positions can be registered .
. Forward / backward position of the seat . Angle of the seatback . Angle of the seat cushion . Height of the seat . Angle of the outside mirrors
. Angle of the outside mirror angle on the passenger ’ s side when the reverse tiltdown operates .
NOTE
The seat position can also be retrieved with the Driver Monitoring System user information . To do so , perform user registration in the Driver Monitoring System settings . Refer to “ Driver Monitoring System ” FP222 .
! Registration of memory position with button “ 1 ” or “ 2 ”
S01AQ060301
1 . Adjust the seat and outside mirror positions under the following conditions . . The parking brake is applied . . The ignition switch is in the “ ON ” position .
. The select lever is in the “ P ” position .
2 . Register the adjusted positions by either of the following procedures . . Press the “ SET ” button , then press either “ 1 ” or “ 2 ” until a chirp sounds within 5 seconds .
. While pressing and holding the “ SET ” button , press either “ 1 ” or “ 2 ” until a chirp sounds within 5 seconds .
A chirp will sound once , and the seat position and outside mirror angle on the passenger ’ s side will be registered .
NOTE
If a new position is registered for the same button , the previously registered memory position is deleted .
! Registration of the reverse tiltdown mirror angle with button “ 1 ” or “ 2 ”
S01AQ060306
CAUTION
Depress the brake pedal when registering the reverse tilt-down mirror angle .
1 . Move the select lever to the “ R ” position , then the outside mirror angle on the passenger ’ s side will move to the reverse tilt-down position .
2 . Adjust the outside mirror angle on the passenger ’ s side . For details about the settings , refer to “ Remote control mirror switch ” FP270 .
3 . Move the select lever to the “ P ” position , then the outside mirror angle will return to its original position .
4 . Register the adjusted positions by either of the following procedures . . Press the “ SET ” button , then press either “ 1 ” or “ 2 ” until a chirp sounds within 5 seconds .
. While pressing and holding the “ SET ” button , press either “ 1 ” or “ 2 ” until a chirp sounds within 5 seconds .