368
Vehicle Dynamics Control system
spare tire . However , even with the specified temporary spare tire , the effectiveness of the Vehicle Dynamics Control system will be reduced .
. If non-matching tires are used , the Vehicle Dynamics Control system may not operate correctly .
In the event of wheelspin and / or skidding on a slippery road surface and / or during cornering and / or an evasive maneuver , the Vehicle Dynamics Control system adjusts the engine ’ s output and the wheels ’ respective braking forces to help maintain traction and directional control .
. Traction Control Function
The traction control function is designed to prevent spinning of the driving wheels on slippery road surfaces , thereby helping to maintain traction and directional control . Activation of this function is indicated by flashing of the Vehicle Dynamics Control operation indicator light .
. Skid Suppression Function
The skid suppression function is designed to help maintain directional stability by suppressing the wheels ’ tendency to slide sideways during steering operations . Activation of this function is indicated by flashing of the Vehicle Dynamics Control operation indicator light .
NOTE
. The Vehicle Dynamics Control system may be considered normal when the following conditions occur . – Slight twitching of the brake pedal is felt . – The vehicle or steering wheel shakes to a small degree .
– An operating noise from the engine compartment is heard briefly when starting the engine and when driving off after starting the engine .
– The brake pedal seems to jolt when driving off after starting the engine .
. In the following circumstances , the vehicle may be less stable than it feels to the driver . The Vehicle Dynamics Control System may therefore operate . Such operation does not indicate a system malfunction . – On gravel-covered or rutted roads – On unfinished roads – When the vehicle is towing a trailer – When the vehicle is fitted with snow tires or winter tires
. Activation of the Vehicle Dynamics Control system will cause operation of the steering wheel to feel slightly different compared to that for normal conditions .
. It is always important to reduce speed when approaching a corner , even if the vehicle is equipped with Vehicle Dynamics Control .
. Always turn off the engine before replacing a tire as failure to do so may render the Vehicle Dynamics Control system unable to operate correctly .
& Vehicle Dynamics Control system monitor
S07AN01
Refer to “ Vehicle Dynamics Control warning light / Vehicle Dynamics Control operation indicator light ” FP184 and “ Vehicle Dynamics Control OFF indicator light ” FP185 .
& To turn on / off the Vehicle Dynamics Control system
S07AN07
To turn the Vehicle Dynamics Control on and off , operate the center information display . Refer to “ Car settings ” FP215 .
Creating an adequate driving wheel slip by deactivating the Vehicle Dynamics Control