362
Power steering
3 . Remove the grip portion of the screwdriver .
4 . While depressing the brake pedal , insert a screwdriver into the hole , move it right and left while pushing the shift lock release button using a screwdriver , and then move the select lever .
If the select lever does not move after performing the above procedure , the shift lock system may be malfunctioning . Contact a SUBARU dealer for an inspection as soon as possible .
& Driving tips CAUTION
S07BG05
If the accelerator and brake pedals are depressed at the same time , driving torque may be restrained . This is not a malfunction .
. Always apply the foot or parking brake when the vehicle is stopped in the “ D ” or “ R ” position .
. Always apply the parking brake when parking your vehicle . Do not hold the vehicle with only the mechanical friction of the transmission .
. Do not keep the vehicle in a stationary position on an uphill grade using the “ D ” position . Use the brake instead .
. The engine may , on rare occasions , knock when the vehicle rapidly accelerates or rapidly pulls away from a standstill . This does not indicate a malfunction .
7-8 . Power steering
S07AJ
& Power steering warning light
S07AJ10
& Power steering system features
S07AJ11
The vehicle is equipped with an electric power steering system . When the ignition switch is turned to the “ ON ” position , the power steering warning light on the combination meter illuminates to inform the driver that the warning system is functioning properly . Then , if the engine started , the warning light turns off to inform the driver that the steering power assist is operational .