158
Moonroof
& Moonroof switch
! Tilting moonroof
S02AK02
S02AK0201
To raise or lower the moonroof , press the moonroof switch .
If the shade is closed past the half-open position when the switch is pressed , it will open up to the half-open position .
NOTE
Release the switch after the moonroof has been raised or has been lowered completely . Pressing the switch continuously may cause damage to the moonroof .
! Sliding moonroof
1 Open 2 Close
S02AK0202
To open the moonroof :
When the moonroof switch is slided and held to the open side , the moonroof will open , then stop slightly before the fully open position to reduce wind noise .
Slide the moonroof switch again to fully open the moonroof .
To close the moonroof :
When the moonroof switch is slided and held to the close side , the moonroof will close , then stop at the tilt-up position .
Slide and hold the moonroof switch again to fully close the moonroof .
To stop the moonroof halfway , slide the moonroof switch either way .
NOTE
. After washing the vehicle or after it rains , wipe away water on the roof prior to opening the moonroof to prevent drops of water from falling into the passenger compartment .
. For the sake of safety , it is recommended that you avoid driving with the moonroof fully opened .
! Anti-entrapment function
S02AK0203
When the moonroof senses a substantial enough object trapped between its glass and the vehicle ’ s roof during closure , it automatically moves back to the fully open position and stops there . The anti-entrapment function may also be activated by a strong shock on the moonroof even when there is nothing trapped .
CAUTION
Never attempt to test this function using fingers , hands or other parts of your body .