156
Rear gate
center information display . For details , refer to “ Car settings ” FP215 .
The ON / OFF setting of the audible signal also works as the audible signal settings for the “ remote keyless entry system ” and the “ keyless access with push-button start system ”. However , for the warning chime such as that caused by “ Reverse function ” FP154 or “ Rear gate auto closure function ” FP155 , it cannot be set as nonoperational .
! Initialization of power rear gate
S02AJ0112
If the power rear gate detects some abnormality while operating , an electronic chirp will sound and the power rear gate operation will be automatically stopped in either opening or closing position . In this case , the system needs to be initialized in the following order to restart the function properly .
! If the power rear gate is closed
S02AJ011201
1 . Keep pressing the rear gate opener switch until it unlocked ( for approximately 5 seconds ) and lift up the rear gate .
2 . Pull down the rear gate until it starts to close automatically . The system will be initialized once the gate is fully closed .
3 . Operate the power rear gate and check that the function operates properly .
! If the power rear gate is opened
S02AJ011202
1 . Pull down the rear gate until it starts to close automatically . The system will be initialized once the gate is fully closed . If the rear gate will not close completely , keep pressing the rear gate opener button for approximately 5 seconds and pull down the rear gate .
2 . Operate the power rear gate and check that the function operates properly .
CAUTION
If the power rear gate function does not operate properly , have your vehicle checked by SUBARU dealer .