134
Remote keyless entry system
Access key fob 1 Lock / arm button 2 Unlock / disarm button 3 Rear gate unlock button 4 PANIC button
Transmitter 1 Lock / arm button 2 Unlock / disarm button 3 Rear gate unlock button 4 PANIC button
The remote keyless entry system has the following functions .
. Locking and unlocking the doors , rear gate and fuel filler lid
. Unlocking the rear gate . Sounding a panic alarm
. Arming and disarming the alarm system . For detailed information , refer to “ Alarm system ” FP142 .
The operable distance of the remote keyless entry system is approximately 30 feet ( 10 meters ). However , this distance will vary depending on environmental conditions . The system ’ s operable distance will be shorter in areas near a facility or electronic equipment emitting strong radio waves such as a power plant , broadcast station , TV tower , or remote controller of home electronic appliances .
NOTE
. For models with “ keyless access with push-button start system ”, the remote keyless entry system will not be activated when the push-button ignition switch is in any position other than the “ OFF ” position .
. For models without “ keyless access with push-button start system ”, the remote keyless entry system will not be activated when the key is inserted in the ignition switch .
. The hazard warning flashers will flash once or twice when the access key fob / transmitter button is pressed in the following cases . – When locking the doors – When unlocking the doors – When unlocking the rear gate
If desired , you can turn the hazard warning flashers off by operating the center information display . For details , refer to “ Car settings ” FP215 . The setting can also be changed by a SUBARU dealer . Consult your SUBARU