130
Keyless access with push-button start system
! Enabling functions
S02AP0702
When the procedure to disable the functions is performed again , a chirp will sound , and the functions are enabled .
NOTE
. The keyless access function will be enabled only if you perform the procedure in the same manner used to disable the function ( for example , when disabling by operating the driver ’ s door , the function will not be enabled even if you operate the access key fob ).
. Press the push-button ignition switch if you do not know the procedure in which the keyless access function was disabled . – When disabling by operating the driver ’ s door : A chirp will not sound .
– When disabling by operating the access key fob : A chirp will sound .
& Selecting audible signal operation
S02AP12
Using an electronic chirp , the system will give you an audible signal when the doors are locked or unlocked . If desired , you can turn the audible signal off by operating the center information display . For details , refer to “ Car settings ” FP215 .
Furthermore , the volume setting of the audible signal can also be changed by a SUBARU dealer . Consult your SUBARU dealer for details .
& Selecting hazard warning flasher operation
S02AP18
Using the hazard warning flasher , the system will give you a visible signal when the doors are locked or unlocked . If desired , you can turn the hazard warning flashers off by operating the center information display . For details , refer to “ Car settings ” FP215 . The setting can also be changed by a SUBARU dealer . Consult your SUBARU dealer for details .
& Warning chimes and warning indicator
S02AP06
The keyless access with push-button start system sounds a warning chime and flashes the access key warning indicator on the combination meter in order to minimize improper operations and help protect your vehicle from theft .
For details , refer to “ Warning chimes and warning indicator of the keyless access with push-button start system ” FP186 .
& When access key fob does not operate properly
S02AP08
Refer to “ Access key fob – if access key fob does not operate properly ” FP464 .
& Replacing battery of access key fob
S02AP09
Refer to “ Replacing battery of access key fob ” FP517 .
& Replacing access key fob
S02AP13
Access key fobs can be replaced by a SUBARU dealer . For more details , contact a SUBARU dealer .
& Certification for keyless access with push-button start system
. U . S . -spec. models
FCC ID : HYQ14AKB FCC ID : Y8PSU19S-3 FCC ID : Y8PSSPIMB02
CAUTION
S02AP14
FCC WARNING
Changes or modifications not expressly approved by the party responsible for compliance could void