Conventional Cruise Control
NOTE
• When the main cruise control is off and the ( CRUISE ) switch is pressed , Adaptive Cruise Control is activated .
• When the main cruise control is on , switching between Adaptive Cruise Control and Conventional Cruise Control is possible by pressing the / ( Following distance setting ) switch *. *: To switch to Conventional Cruise Control , press and hold the switch for approximately 2 seconds or longer .
• Conventional Cruise Control can be used even when EyeSight is temporarily stopped .
How to use Conventional Cruise Control
■ Setting Conventional Cruise Control
( 1 ) Setting Adaptive Cruise Control to standby status Press the ( CRUISE ) switch . At this time , ( Adaptive Cruise Control indicator ) ( white ) and the following distance setting indicator are displayed on the EyeSight display area of the combination meter display . The set vehicle speed display will read “ - - MPH ( - - - km / h )”. When the ( CRUISE ) switch is pressed , the initial cruise control mode is always Adaptive Cruise Control .
Following distance setting indicator
Adaptive Cruise Control indicator ( white )
H00541 H00733
140