Subaru Ascent Manuals 2023 Ascent EyeSight Driving Assist Manual | Page 140

EyeSight Assist Monitor
EyeSight Assist Monitor Operation
When the ignition switch is turned to the ON position , the LED indicators will illuminate in the order of Yellow � Red � Green . When EyeSight Assist Monitor customization is turned on , they will illuminate twice . To inform the driver of the operation condition of EyeSight while driving , the LED indicators are illuminated according to the operation condition of EyeSight and the light they emit is projected on the lower part of the windshield . yellow red green red yellow
S03882
Display
Red indicators blink simultaneously ( 4 indicators )
Red indicator blinks ( one side )
Yellow indicator blinks ( one side )
Yellow indicators blink ( alternately )
Yellow indicators blink simultaneously
Green indicator illuminates
Condition
• The Following Distance Warning , Pre-Collision Braking System ( first braking or secondary braking ), Automatic Emergency Steering ( if equipped ), “ Obstacle Detected ” warning or Pre-Collision Throttle Management is operating .
• Lane Centering Function was canceled when there was no operation of the steering wheel .
Lane Centering Function is active and the vehicle appears likely to depart the lane . The side where the vehicle has left its lane blinks , and the side that has not left its lane illuminates .
Lane Departure Warning is operating . The side where the vehicle has left its lane blinks , and the side that has not left its lane illuminates .
Lane Sway Warning is operating .
• Steering wheel operation is not detected for a certain period of time .
• Lane Centering Function was canceled automatically by the system ( blinking rapidly ).
• Lane Departure Prevention Function was canceled automatically by the system ( blinking rapidly ).
A vehicle is detected ahead while Adaptive Cruise Control is operating .
138