Lane Departure Prevention Function
■ Canceling Lane Departure Prevention Function
●Canceling by driver operation Any of the following operations temporarily cancels Lane Departure Prevention Function . While temporarily canceling this function , the lane indicator turns to gray .
• Depressing the brake pedal strongly
• Operating the turn signal lever
• The system determines that the driver operates the steering wheel to make a lane change .
• Turning on the hazard warning flasher switch
●Automatic cancellation by the system Under the following conditions , Lane Departure Prevention Function is temporarily canceled . While the function is temporarily canceled , the lane indicator turns to gray .
• The system does not detect the lane markings .
• The vehicle speed is less than approximately 37 mph ( 60 km / h ) or is more than approximately 100 mph ( 160 km / h ).
• Vehicle Dynamics Control or Traction Control Function is activated .
• Either the driver ’ s door , the front passenger ’ s door or the rear door is open .
• The driver ’ s seatbelt is unfastened .
• The electronic parking brake is applied .
• The select lever is moved to a position other than “ D ” or “ M ”. - Lane Departure Prevention Function can be resumed after the select lever is returned to the “ D ” or “ M ” position .
• Entering a sharp curve
• On a sharp curve
• Due to the road conditions
• Due to another system operating
• The EyeSight system has a malfunction . ( EyeSight warning indicator : Yellow )
� Page 153
• The EyeSight system has stopped temporarily . ( EyeSight temporary stop indicator : White )
� Page 155
116