Lane Departure Prevention Function
How to use Lane Departure Prevention Function
Operate the center information display to turn on Lane Departure Prevention Function . This function is turned on by selecting “ All Functions ” or “ Lane Departure Prevention Function Only ” on the “ Lane Departure ” screen of the EyeSight settings .
� Page 158 When Lane Departure Prevention Function is turned on , the lane indicator ( gray ) is displayed on the EyeSight display area of the combination meter display .
Lane indicator ( gray )
H00745
Lane Departure Prevention Function goes into the standby status , and the lane indicator ( white ) illuminates when all of the following conditions are met .
• The vehicle speed is between approximately 37 mph ( 60 km / h ) and 90 mph ( 145
White km / h ).
• The system is detecting the lane markings .
• Lane Centering Function is not operating .
• The driver is operating the steering wheel .
• On a road that has a lane width that is between approximately 10 ft ( 3 m ) and 15 ft ( 4.5 m )
• On a straight road or gentle curve
• Driving near the center of a lane
H00746
114