Subaru Ascent Manuals 2022 Ascent EyeSight Driving Assist Manual | Page 53

Advanced Adaptive Cruise Control
■ How to use Adaptive Cruise Control
●Setting Adaptive Cruise Control
( 1 ) Setting Adaptive Cruise Control to standby status Press the ( CRUISE ) switch . At this time , ( Adaptive Cruise Control indicator ) ( white ), your vehicle indicator and the following distance setting indicator are displayed on the EyeSight display area of the combination meter display . The set vehicle speed display will read “ - - MPH ( - - - km / h )”.
Following distance setting indicator
S03393
Adaptive Cruise Control indicator ( white )
S03288
To set the ready status :
Adaptive Cruise Control can be activated
when all of the following conditions are
met and
( READY indicator ) is displayed
on the EyeSight display area .
-
All doors ( except the rear gate ) are
-
closed .
The driver ’ s seatbelt is fastened .
READY indicator
-
The electronic parking brake is not engaged . The electronic parking brake
indicator light is turned off .
S02965
-
The select lever is in the “ D ” or “ M ” position .
-
The brake pedal is not depressed while driving or the brake pedal is strongly
depressed while stopping .
51