DLI INTERLIGHTING
High PAR Bi-Directional LED Light Between Your Plants
DLI Interlighting fixtures are designed to deliver high levels of photosynthetic photon flux
(PPF) values with an optimal angle vertical light uniformity. The Interlighting modules are constructed
in a slim water-proof design and suspended between the plant canopy rows with the easy-hang system.
A percentage of harvestable plant height can suffer from lack of light due to dense canopy foliage; which will result in fewer flowers. The DLI Interlighting
system will provide High PAR PPF at an optimized coverage angle making sure the whole plant is activated by light; extensive trials have shown bigger
leaves and flowers at the lower portions on the plant. The modules emit very little heat and require no active cooling minimizing leaf burn.
The DLI Interlighting 1 x driver & 2 x LED modules: 1 driver powers 2 LED modules
systems Kit consist of: Each module has LED’s on both sides and come as standard lengths of 4ft (120cm)
For a uniform plant a uniform pattern is required.
HPS or CDM only give the top leaves of the plants a certain amount of light and
even with the best reflectors in the market, only the upper 40% of the plant
canopy receives enough light for photosynthesis.
The lower 60% of the plant is living in its own shadow and the bushier the plant
gets the less light the lower part of the plant receives. Interlighting is Greenhouse
technology and a method that’s used in Nordic greenhouses because of lack of
natural daylight, indoor cultivation has no natural daylight to supplement
photosynthetic photon flux and will benefit greatly from this technology.
Each of the Interlight modules is 4ft or 120cm; the size is ideal for the use on tray
1 x Interlighting Module 2 x Interlight Modules
Hang each module level and horizontal:
Your aim is light spread on the bottom
third of the plants foliage. Hang both modules level and horizontal:
Your aim is light spread on the bottom
two thirds of the plants foliage.
and bench-systems and can either be used over the width (4ft or 120cm) of the
tray or joined to run over the length (8ft or 240cm) of the tray.
How it works
A simple cable tie can connect the two modules to an 8ft or 240cm
continuous bar. The fixture can be used on any voltage between 100V and 277V.
DLI produces fixtures with any necessary powerplug.
The DLI Interlighting fixture is rated IP65 and is fitted with a hardwired
9ft or 270cm cable. The DLI Interlighting fixture can easily be suspended on the
hooks embedded in the fixture.
Even light distribution optimises the plant production. The plants will also
get stronger roots, develop stronger branches and leaves and increases the
absorption of nutrients resulting in more flowers in the bottom part of the
plants.
INCLUDED IN THE BOX...
1x Driver & 2x LED Modules per Set
Technical Specifications
CENTRAL DRIVER + 2 LED LIGHT ENGINE TOPOLOGY
Wide input voltage
90 - 305V
Power consumption: 96W
IP Rating Light Engine: IP65
Expected lifetime: > 50.000 hours
Total Lightoutput: 250 micromol/s Warranty: 3 years
IP Rating Driver: IP67 Powercable: 9ft or 2,70mtr
WWW.STEALTH-GARDEN.COM
205