The pilot valve will remain energized for the length of time as indicated by the setting of the
"Pulse Duration / on time" control. Note that the calibrated dials are for approximate settings
only and if exact times are required, they must be measured.
Pilot valve number 2 will automatically be energized at some time interval after pilot valve
number 1 has been de-energized. This length of time will be as indicated by the setting of the
"Pulse Frequency / Off time" control, "Output 2” LED will provide visual indication that this
event is occurring. The Controller will continue to sequentially energize the pilot valves until the
power is removed.
Additional Parameters for feedback type as follows:
A] 1) System Ok / Timer Healthy - Potential free 'NO' relay contact.
2) Sequence 'ON' / D.P. Low - Potential free 'NO' relay contact.
B] 1) Auto Mode - Channels activated in sequence as per 'On' and 'Off' time.
2) Manual mode - Output channels are activated by pressing push button on PCB near
Auto /Manual switch channel in sequence
MANIKS Sequential Controller Advantages over Other Manufacturers
Ensured availability:
Other suppliers may be limited to a single
Distribution point:
We provide localized distribution across the globe. MANIKS offers its most popular products for
dust collectors via quick-shipment programmers — including “Express”.
Superior support:
With more than 100 professionals handling direct sales, plus more than 140
Distributors in Europe alone, MANIKS has you covered. Ask our technical experts anything
about specific-cation, installation, performance, or maintenance of dust collector air system
components. You’ll get fast and most accurate answers.
Unequalled quality and reliability: