MAKING A SODA-POWE RE D BATTERY
Attach lead wires to metal strips. Attach one lead wire to one metal strip by
opening the alligator clip and closing it on the strip.Then, attach a different lead
wire to the other metal strip, again using the alligator clip. Be careful not to let
the alligator clips touch the soda.
It doesn’t matter which color of wire attaches to which strip
Test the battery.
• Following the instructions that come with your voltage meter, connect a lead
wire from each metal strip to the voltage meter.The meter should read your
battery’s voltage at roughly 3/4 of a volt