PRODUCTS
WALK THE TORK CRAFT
T
he New Tork Craft 4 in 1 Multi-
functional Workbench has just
been launched – the new unit comes
with a set of wheels for easy steering
and mobility and the rear set
is lockable.
It’s essential for moving heavy
units around, transporting your
machines to site and then converting
the unit into a fully operating work
bench. The large top has all you need
for clamping your work piece to the
table top plus added storage
compartments for one bits, tools
and screws.
The unit can be changed from a
hand trolley, a floor trolley or a
legged scaffold unit with adjustable
legs for height, that lock safely into a
fixed position – this gives you a
fourth mode, which is the workbench
with the optional height adjustment
and mobile stand unit for scaffolding
work both indoors and outdoors.
www.torkcraft.co.za
THE BEES’ KNEES
H
oward Feed-N-Wax Wood Polish &
Conditioner enhances the natural beauty and
depth of grain in all woods, finished and
unfinished. Containing a blend of beeswax,
carnauba wax, mineral oil and orange oil, Feed-N-
Wax does not contain silicone or linseed oils.
Feed-N-Wax Wood Polish & Conditioner provides
added protection and lustre to timber and helps
introduce conditioning oils that ‘feed’ the wood
while providing a protective coating of beeswax
and carnauba wax.
It helps to preserve and keep all wood from
drying out, fading or even cracking and
deterioration of all wood finishes. It should be
used whenever the piece looks faded or dry,
usually every three to six months.
www.howardproducts.com
SEAMLESS WORK
B
ESSEY offers professional
seaming tools to position
plates with smooth surfaces such
as worktops or wall coverings,
including the PS55 and the
PS130. Both clamping tools work
with suction cups which are
connected with a spindle.
The two models differ in the
generation of the vacuum power.
The PS130 uses manual vacuum
pumps to achieve the high
suction power which is necessary
for heavy plate material and
DO YOU HAVE AN INNOVATIVE AND
RELEVANT PRODUCT YOU WOULD
LIKE FEATURED?
www.saroofing.co.za
allows for a high horizontal
clamping force up to 1 200N.
If a clamping force up to 260N
is sufficient for the sheet
material then the smaller PS55 is
also suitable, as here the vacuum
is achieved by turning the
clamping levers. The spectrum
of the plate material is from
ceramic to granite, plastic,
sheet metal, glass and even
artificial stone.
www.vermontsales.co.za
LET US KNOW...IT'S FREE
EMAIL: [email protected]
CALL: +27 (0) 11 579 4940
CLADDING // CONCRETE // INSULATION // STEEL // THATCH // TIMBER // TRANSLUCENT // WATERPROOFING // COMPONENTS
NOVEMBER 2018
31