PREVENTIVE MAINTENANCE / MANTENIMINETO PREVENTIVO
It is necessary to do a preventive maintenance in the videorockolas, the technician who is in charge
of this must know 4 basic subjects: installation and maintenance of software, knowledge in
installation and repair of the hardwere of the computer, electronic with emphasis of sound and
sources of power / Es necesario hacer un mantenimiento preventivo en las videorockolas, el técnico
que se encargue de esto debe saber 4 temas básicos: instalación y mantenimiento de software,
conocimiento en instalación y reparación del hardwere del computador, electrónico con énfasis de
sonido y fuentes de poder.
TOOLS FOR GOOD MAINTENANCE:
Blower
Screwdrivers of all types
Tweezers
Keyboard and mouse
Data straps
Soldering and welding
Silicone gun
Cleaner (isopropyl alcohol)
insulating tape
spare cables
HERRAMIENTAS PARA UN BUEN
MANTENIMIENTO:
Soplador
Destornilladores de todo tipo
Pinzas
Teclado y ratón
Correas de datos (IDE Y SATA)
Cautín y soldadura
Pistola de silicón
Limpiador (alcohol isopropilico)
Cinta aislante
Cables de repuesto
STEPS FOR GOOD MAINTENANCE:
It is necessary to check fans and triggers as dust can damage them. The fan may be
spinning at a lower speed than it should, therefore you must touch the fan with your hand
to know what temperature it has, if it is very hot, remove it, clean it and lubricate it.
Check the processor heatsink by touching it in the base, if it is too hot, it indicates that the
processor may be damaged. If this happens, consider changing the fan. Check in the Bios,
in the section of (hardware monitor), the revolutions per minute of the fan, if the
revolutions are below 3,000 RPM, proceed to change it.
Perform a Scandisk and a Ccleaner to correct errors created by power outages or incorrect
shutdowns. In this step, Windows registry errors and lost chains are corrected.
Clean the monitor, dust sticks on the screen because the monitor is charged with static
and attracts dust.
Check the monitor's grip, the power source, the hard disk, etc. The vibration produced by
the loudspeakers can mismatch the parts and screws. Make a careful review of each of the
components.