revista pdf fox 34 tuning guide Fox 34 tuning guide | Page 8

Additional tuning options
clip-on Volume Spacers
Changing volume spacers in the 34 FLOAT fork is an easy internal adjustment that
allows you to change the amount of mid stroke and bottom out resistance.
If you have set your sag correctly and are using full travel (bottoming out) too easily,
then you could install one or more spacers to increase bottom out resistance.
If you have set your sag correctly and are not using full travel, then you could
remove one or more spacers to decrease bottom out resistance.
Installation procedure and tuning options are available online at:
ridefox.com/ownersmanuals
34 FLOAT Volume Spacer Configurations
Travel Volume Spacers
Factory Installed *Max Volume
Spacers
160 mm 1 4
5
150 mm 2 140 mm 2 5
130 mm 3 6
120 mm 5 6
110 mm 6 7
* Do not exceed the Max Volume Spacers number, as this can damage your fork.
typical air spring curves
FULL COMPRESSION
MAXIMUM SPACERS
(LEAST AIR VOLUME)
FACTORY SETTING
(STOCK AIR VOLUME)
MINIMUM SPACERS
(MOST AIR VOLUME)
FULL EXTENSION
FORK TRAVEL
8