Mirror Installation Instructions
(please note it is recommended that the mirror be installed by a qualified
electrician.)
Ÿ Remove the mirror from the packaging and place it on a soft or padded surface.
Ÿ Do not remove the protective plastic film on the surface of the mirror until it is fully
Ÿ
Ÿ
Ÿ
Ÿ
Ÿ
Ÿ
Ÿ
fitted to the wall.
Mark out the desired height and position of the mirror.
Always wear protective gear when working with glass eg. gloves & eye protection.
Drill the holes once marked out and insert the 8mm screws provided.
The use of any other screws may effect the security of the installation.
Do not rest the mirror corners on any hard or abrasive surfaces.
Do not place your handover the LED tubes when picking up the mirror as this may
damage the lighting components.
Connect the 200/240V power supply to the transformer supplied at the back of
the mirror.
Ÿ Test the mirror before fixing it onto the wall via the keyholes at the rear of the mirror.
Ÿ To fix it securely lift the mirror up and lock it down with a slight bit of pressure.
Ÿ Make sure the mirror is secure before the installation is finalised and the protective
plastic has been removed from the face of the mirror.
31