a
Raceline / Shockline Hardware
RAMM engineers have developed components to make installation easier and faster for DIYers and professional installers .
1 . The coated wire end loop assembly is designed with ease of installation in mind . Used at the ends of your fence , they simply loop over your wood end post like a lasso . Pull tight , with the loop allowing the rail to run straight and you are ready to install . In-line fence tensioners easily attach to coated wire end loops allowing for the fence rail to be tensioned .
Our staff will help answer all of your questions regarding any coated wire components you may need for your Raceline or Shockline project .
2 . Claw insulators are made to easily insert the electric rail through the claw and hold the rail to the wood post .
3 . T-Post electric claw insulators are used with metal T-Posts to hold the rail in place .
4 . 2 ” extra-wide barbed staples , installed with 1 / 4 ” spacing between coated wire , can be used with Raceline to hold the rail in place on the wood posts . Tube insulators can be used in place of claw insulators for Shockline as an alternative .
RAMM
The use of a spinning jenny is recommended with installation . It will help to make installation easier . If any high tensile wire rail is folded flat onto itself and then straightened and installed with tension , the integrity of the wire will be compromised and can break .
41 a