embroidering the words Be My
Valentine
1. Using the built-in embroidery fonts
on your embroidery machine, pick
a font approximately 30mm in size.
Type in the words Be My.
2. Hoop a piece of Tear-A-Way stabilizer in the embroidery hoop and
attach to the embroidery arm.
3. Place the top border of the banner
over the stabilizer and use the
baste feature of the machine to
baste the border to the stabilizer.
4. Thread the embroidery machine
with 40wt rayon thread on top and
bobbin thread in the bobbin.
5. Embroider the words Be My in the
upper left corner of the border.
6. Repeat with the word Valentine
and embroider it in the lower right
hand corner of the border.
quilting the banner
1. Place the 26" x 26" [66 x 66cm]
black tone-on-tone fabric face
down on a surface. Tape in place.
Place the 26" x 26" piece of quilt
batting over the fabric and centre
your banner over the quilt batting.
2. Use your favourite method to
baste the banner.
3. Thread the machine with invisible
thread on top and black thread in
the bobbin.
4. Attach the Stitch in the Ditch foot.
Engage the IDT™ sys FV