Prior to starting on the main project I always check my tension
on a test piece. I had to fiddle around a bit until the stitches
looked even on both sides. Doing a test piece is a good practice to get into because ripping out free motion quilting is
no fun at all – just ask my husband.
Nice and relaxed I stippled around the snowflake ending up
back where I started. Stippling is like doodling with a pencil
only you’re using a needle and thread. To get comfortable with
free motion quilting it’s a good idea to draw out the design on
paper with a pencil before moving the machine. Also, remember, Rome wasn’t built in a day and free motion stippling isn’t
mastered in a day – it takes lots and lots and lots of patience,
practice, and persistence.
The stippling turned out wonderful and looks great. The
Ambition 1.0 decked out with the spring loaded darning foot
does a beautiful job of free motion stitching. The stitch tension
was pretty much right on with little adjustment needed for the
threads I was using.
Stippling around the snowflake
Adding the final touch
The quilting is complete and all that is left is the binding. One
2¼" x WOF strip will be sufficient to bind the quilt. Use your
favourite method to attach the binding to the mug rug. I like
sewing the binding on with the quarter inch foot that has the
guide. The guide sits right along the edge of the quilt and
keeps everything lined up and even. I use a ¼" seam on my
binding, but some people prefer a 3⁄8" seam. Neither is right or
wrong and it all comes down to personal preference.
Mitered corners on binding
Do those mitered corners give you a bit of trouble? Here are a
couple of hints for creating perfect mitered corners each time.
At each corner, you want to stop a quarter inch from the corner,
pull your needle out and cut your threads. The Pfaff perfect
quarter inch foot has a red line on the toe, which is a perfect
quarter inch from the needle giving a great visual guide for
when to stop at the corner.
As an aside, this foot with the guide is also perfect for topstitching a ¼" from a seam line!
Pull the piece out from under the foot and fold the binding
so that it's at a 45 degree angle to the corner and running off
the top of the piece. With this piece, there’s no issue of having
a seam at the corner, which creates extra bulk. When sewing
binding on a larger piece, measure the binding out so the
seams do not fall at the corners. Then, fold the piece of binding
back over itself so that it’s lying parallel to the edge of the quilt.
Begin sewing from the edge. There will be a folded triangle of
fabric under the binding piece at the corner. Continue around
the mug rug until the binding is finished. Connect the two ends
of the binding using your favourite method.
The Perfect Quarter Inch Foot
Fold fabric at a 45 degree angle
Sewing and quilting the snowflake mug rug took no time at all!
Now, I have a wonderful seasonal mug rug in winter hues to
use for my coffee mug and occasional treat in my studio.
Happy Quilting z
17