Pulse Jet valve Pulse valve For Dust Collection System | Page 3

















Ease Of Maintenance
Lower Power Consumption
Faster Reaching of Peak Pressure
Preventing air loss
High Diaphragm life
Ease of installation
Better flow characteristics
Higher Life
Superior Corrosion Resistance
No Rust Jamming
Lower air consumption
Better cleaning of Bag Filters
Promoting a greener world
Built with Hytrel which enhances life
Choke and noise free performance (Reduce operating noise)
Superior leak protection against dust
Pulse valve Specification :
Constant innovation at Maniks with expert team of engineers has developed new design, and
cost effective products with high quality and we also manufacture products based changing
requirements of clients. Here are specifications of our dust collector pulse valve:







Electrical Standard Voltage AC : 50Hz…..24/220 Volts
Electrical Standard Voltage DC : 24/Volts
Maximum Medium Temperature : 650C
Fluctuation : 10%
DC Current : 20W
AC Current : 19VA
Maximum Ambient Temperature : 550C
Pulse valve Operation :
Maniks pulse valves are functioned by integral solenoid pilot operator. The Trapped air above
pulse valve diaphragm is immediately used up causing fast opening of diaphragm valve, When
the valve is energized. Air comes out through bleed hole of main pulse valve to balance the
diaphragm pressure and immediately closes the valve, when the pilot valve is de-energized.
Duty Cycle:The possessing duty time cycle for ac voltage is 20% and for DC voltage is 10 %. This
indicates energized time is maximum 1/5th of de-energized time for AC and 1/10th for DC
voltage.