Pulse Jet valve Pulse valve For Dust Collection System | Seite 3

• • • • • • • • • • • • • • • • Ease Of Maintenance Lower Power Consumption Faster Reaching of Peak Pressure Preventing air loss High Diaphragm life Ease of installation Better flow characteristics Higher Life Superior Corrosion Resistance No Rust Jamming Lower air consumption Better cleaning of Bag Filters Promoting a greener world Built with Hytrel which enhances life Choke and noise free performance (Reduce operating noise) Superior leak protection against dust Pulse valve Specification : Constant innovation at Maniks with expert team of engineers has developed new design, and cost effective products with high quality and we also manufacture products based changing requirements of clients. Here are specifications of our dust collector pulse valve: • • • • • • • Electrical Standard Voltage AC : 50Hz…..24/220 Volts Electrical Standard Voltage DC : 24/Volts Maximum Medium Temperature : 650C Fluctuation : 10% DC Current : 20W AC Current : 19VA Maximum Ambient Temperature : 550C Pulse valve Operation : Maniks pulse valves are functioned by integral solenoid pilot operator. The Trapped air above pulse valve diaphragm is immediately used up causing fast opening of diaphragm valve, When the valve is energized. Air comes out through bleed hole of main pulse valve to balance the diaphragm pressure and immediately closes the valve, when the pilot valve is de-energized. Duty Cycle:The possessing duty time cycle for ac voltage is 20% and for DC voltage is 10 %. This indicates energized time is maximum 1/5th of de-energized time for AC and 1/10th for DC voltage.