featured products
INET-IOEX-IRCOM: infiNET EX® WIRELESS IR/RS-232 CONTROL MODULE
A compact and low-cost IR and RS-232 control
interface that communicates via the infiNET EX®
wireless network.
Every installer knows — running wires is a
challenge and it adds substantial cost to any
project. Crestron® infiNET EX® technology offers
a wireless solution for controlling many devices
in a home or commercial facility, eliminating the
need to cut into walls, fish through insulation, or
install expensive conduit just to get a wire to each infiNET EX®
Ultra-reliable infiNET EX wireless technology
device.
provides steadfast 2-way RF communications
The INET-IOEX-IRCOM is a very compact and throughout a residential or commercial structure
low-cost wireless device that is perfect for use without the need for physical control wiring.
in retrofits, historic buildings, or any budget- Employing a 2.4 GHz mesh network topology,
conscious application. It provides an IR and each infiNET EX device functions as an expander,
RS-232 control interface for video displays, AV passing command signals through to every other
components, garage door openers, and other infiNET EX device within range (approximately
equipment. Essentially, anything that can be 150 feet or 46 meters indoors), ensuring that
controlled using basic serial or IR commands can every command reaches its intended destination
be integrated with a Crestron control system using without disruption.
the INET-IOEX-IRCOM. It includes two discrete
IR ports and one bidirectional RS-232 port, and The INET-IOEX-IRCOM communicates with
communicates with the control system via the a Crestron control system via an infiNET EX
infiNET EX wireless network, enabling control and Wireless Gateway (model CEN-RFGW-EX or
monitoring of the remote equipment without MC3). Up to 100 infiNET EX devices, including
Cameo® Wireless Keypads and In-Wall Dimmers
having to run wires through walls and ceilings.
and Switches, may coexist on a single wireless
network, and every device that is added to the
network effectively increases the range and
stability of the entire network by providing
multiple redundant signal paths. Built-in Dynamic
Frequency Allocation continuously monitors
RF conditions, automatically selecting the
clearest channel to prevent interference from
neighbouring networks, cordless phones, and
microwaves.
KEY FEATURES
•
•
•
•
•
•
•
•
A low-cost wireless control interface
Eliminates the need to run wire or install
conduit
Provides 1 RS-232 and 2 IR control ports
Communicates via the infiNET EX®
wireless network
Compatible with Crestron® 2-Series or
3-Series™ control systems
Stores frequently-used IR codes on
board for fastest response
Reports data overflow to the control
system
Ultra-compact, surface mount design
For further information contact Crestron House
on: 011 745-8190
THE RACKOON
Rackoon: Earning his stripes daily.
MAIN FEATURES
And there’s a reason this little fella has a twinkle in his eye. With an unrestricted
output resolution, full HippoNet compatibility and all the software usability
of its bigger relatives you can forgive that cheeky look.
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
Rackoon is a power-packed addition to the Hippotizer server range. This little
1U rackmount rascal gives 6 layers of full 1080p HD playback in a shake of the
tail. Boasting all the usual features of Hippotizer’s award winning software,
Rackoon integrates with all other Green Hippo servers seamlessly. A loveable
and helpful little beast delivering a level of functionality to belie its diminutive
stature.
Bouncing with feature after feature, Rackoon would be considered pesky
were he not so useful. Feed him media and he’ll reward you with an array
of tricks. Full geometry control and support for integration into almost any
setup via a host of native protocols, plus all the renowned Hippotizer tools for
video-mapping and multi-server setups means that this little fella is housetrained and ready to perform tricks that’ll make you love him. Built-in timeline
functionality and scheduling features make Rackoon a powerful stand-alone
playback device too.
PixelMap multiple universes via Ethernet, or even display composite video
inputs such as cameras or players on any or all of its six layers. There’s a place
in any setup for this little chap.
•
•
•
•
Single output at 1920 x 1080
Class leading video playback and real-time rendering
6 media layers (4 layers in XFade)
PixelMapper with unrestricted number of output universes
1U rackmount case
Optional patch panel for professional connections
2 FX engines per layer - 100+ effects per FX engine
Frame accurate synchronisation across multiple servers
Media Manager with live media updating and WatchFolders
ScreenThief for Ethernet video capture
Keystone and ScreenWarp for non-linear projection surfaces
Soft-edge blending
Timeline for stand-alone operation
HippoNet
External control via DMX / MIDI / TCP-IP / OSC / RS232 / MaNet
High performance 3D show visualisation integration via CITP
and HMap2
Map to the most complex screen setups using RegionMapper
and the award winning VideoMapper
Create stunning multi-screen shows with UberPan controller
driving upto 4 render modes
New visual presets applicable across all layers
XFade - Seamlessly switch between clips
PROMAG
– fourth quarter 2013
17