PROFIS Design Guide: US-EN Summer 2021 | Page 379

HILTI PROFIS ENGINEERING 3.0.44

Adhesive anchor group
Example PROFIS Engineering Report for an adhesive anchor group
Group calculations are for N cbg , N ag
, V cbg , and V cpg
7 Installation data
Profile :
no profile
Anchor type and diameter :
HIT-HY 200 + HAS-V-36 ( ASTM F1554 Gr . 36 ) 1
Hole diameter in the fixture :
d f
= 1.125 in .
Item number :
not available ( element ) / 2022793 HIT-HY 200-R ( adhesive )
Plate thickness ( input ):
1.000 in .
Installation torque :
1,800 in . lb
Recommended plate thickness :
not calculated
Hole diameter in the base material :
1.125 in .
Drilling method :
Hammer drilled
Hole depth in the base material :
20.000 in .
Cleaning :
Compressed air cleaning of the drilled hole according to instructions for use is required
Minimum thickness of the base material : 22.250 in .
1 Hilti HAS Carbon steel threaded rod with Hilti HIT-HY 200 Safe Set System
7.1 Recommended accessories Drilling
Cleaning
Setting
• Suitable Rotary Hammer
• Compressed air with required accessories to blow from the bottom of the hole
• Dispenser including cassette and mixer
• Properly sized drill bit
• Proper diameter wire brush
• Torque wrench
Coordinates Anchor in . Anchor
x
y
c -x
c + x
c -y
c + y
1
8.000
-6.000
-
46.000
-
-
2
8.000
6.000
-
30.000
-
-
3
8.000
6.000
-
46.000
-
-
4
8.000
6.000
-
30.000
-
-
Input data and results must be checked for conformity with the existing conditions and for plausibility ! * PROFIS Engineering ( c ) 2003-2018 Hilti AG , FL-9494 Schaan Hilti is a registered Trademark of Hilti AG , Schaan
379 NORTH AMERICAN PROFIS ENGINEERING ANCHORING TO CONCRETE DESIGN GUIDE — ACI 318-14 Provisions