Professional Sound - August 2019 | Page 29

The NAC Renewal at a Glance • • • • • • • • • Approx. 600,000 ft. of cable pulled More than 9,000 connection points More than 100 network switches 50 km of new electrical & AV conduit 200 km of new electrical wire, AV cable & fibre 300 new speakers 1,300 new light fixtures 19,000 sq. ft. of veneer on the orchestra shell 32,500 sq. ft. of isolation material to minimize sound transfer backstage works, with each of the three main perfor- mance venues having its own dedicated network. As well, there is a mix of perma- nently-installed Optocore network devices and mobile racks that can be moved be- tween connection points in a room or from one venue to another to accommodate larger shows that need additional I/O. The Optocore units are run at a 2 GB network speed and 96 kHz sampling rate for pre- mium audio quality and optimal channel count. There are network connections at all FOH and monitor console positions in the venues, which allow guest consoles to tie into the network via analog or AES and distribute audio to any network device. With the pre-programmed macros in the Optocore control software, users can easily change the network’s routing to feed AES or analog from any location to the PA, monitor amplifiers, or installed monitor speakers. At the core of each Optocore network is the company’s new Route66 AutoRouter. “The Route66 is a welcome product, be- cause Optocore is a ring network and, obvi- ously, if you’re going to bring Optocore into a big facility with multiple networks, trying to establish a ring is very difficult, and main- taining that ring without somebody break- ing it is even more difficult. They just need to unplug it and they could possibly bring down all three venues,” explains Van Dijk. “So, the Route66 allows us to wire what I would call ‘subrings’ within each venue. The gran- ularity is dependent on a number of optical ports and things like that, but you can have small rings, even within the venue, that can loop back to the Route66 and all come together there. So, it’s almost like going to a star network, which is a fundamental design principle typology behind IT… The Route66 also keeps the venues isolated, so you ba- sically have a Route66 talking to another Route66 in another venue and if one goes down or you lose that link, the venue can still run, whereas conversely, if somebody unplugged something in the studio, they could possibly bring down Southam Hall. That was a big issue for the client.” Being one of the NAC’s head audio engineers and experiencing the Optocore network on a daily basis, Holmes is thrilled with its ease-of-use. “The advantage is it’s easy to have another device put onto the system at any moment. It’s very, very easy to accommodate the need for, say, an extra monitor system or an extra rack for more I/O. Transporting audio from room to room has never been this easy. You could easily have a console with an I/O rack in a separate room and have it communicating instantaneously,” he says. “At the moment, it is our way of communication for audio, but it’s also ready for future applications. We’ve basically created the infrastructure for future applications in audio transport where we would be able to, say hypothetically, do a full multitrack recording in a separate room without even slightly interrupting a perfor- mance that’s happening.” Holmes says it’s made troubleshooting issues easier, too. “Everything is seen all within one network, so you can stay in one location and remotely troubleshoot another aspect of the system. That is another thing we haven’t had before is the ability to see problems that are quite far away,” he adds before mentioning the new Riedel wireless communications system that works hand- in-hand with the network. With the comm system on the network, a technician wear- ing a comm pack can enter one venue, join its network, and then wander down the hall to another venue and join that network. “I’m able to use this system to com- municate with anybody,” continues Holmes. “So, if you’re wearing a communications pack, you’re now wirelessly communicating throughout the entire facility with no drop- outs or issues whatsoever. Hypothetically, if I’m trying to locate a problem within an amplifier rack and it happens to be in a completely separate remote location within the facility, I can have another technician in that position while I remain at a console or maybe another rack to actually source down what the issue is.” Commenting on the network, Radu adds: “With pretty well every piece of gear having a network port now, I think the amount of networking that goes on in there is pretty remarkable. I think it’s close to 100 Luminex switches in there. There are basically five complete networks in there with a couple routers that can access all the networks, but everything is sort of discrete on its own.” “From an installation point-of-view, they didn’t really have pathways to the building, so the conduit system and everything that needed to be installed to enable all of this was substantial. It was quite an undertaking and Solotech and everybody really stepped up. Mark Radu and his team, they did a great job at sorting through all of that,” says Van Dijk at Engineering Harmonics, noting that everybody was working under an ex- tremely tight deadline. “The venues were only shut down from June through August of last year; the rest of the time, everything was being done while the building was operational, so things had to be done over- night and it was crazy.” The project being a renovation instead of a fresh build also introduced unforeseen hiccups. As Van Dijk points out, the electri- cians encountered many problems because the power and grounding systems had been compromised, and the mechanical infrastructure also had to be redone in many areas. “It was an incredible undertaking with a lot of pressure on everybody to get that project done. It is actually quite remarkable in hindsight, but they opened on time and, again, credit to Solotech and everybody – all of the other contractors, too – they didn’t lose a show.” “I believe the National Arts Centre is now Canada’s leading performance space in both flexibility and technical abilities,” Holmes adds in closing. “We have an infra- structure that I think will easily handle any technology that will be offered in the next 20-plus years.” And so, at the end of its expansive Pro- duction Renewal Phase, the National Arts Centre is well-positioned to continue being the beacon of Canadian performing arts for decades to come. Michael Raine is the Senior Editor of Professional Sound. PROFESSIONAL SOUND 29