Product Technical Guides : US-EN Steel Deck Fastening Systems | Page 27

Steel Deck Fastening Systems

X-HSN 24 for Fastening Deck to Bar Joist 1.2
1.2.1 Product Description
The Hilti bar joist deck fastening system consists of powder-actuated tools that are primarily used with the X-HSN 24 fasteners , which are available in a collated version .
For many bar joist decking projects , the tool of choice is the DX 860-HSN tool . This self-contained stand up decking tool is powered by 0.27 caliber short cartridges , which are loaded into the tool in strips of 40 . The cartridges drive the X-HSN 24 fasteners into almost any type of steel deck profile and base steel thicknesses of 1 / 8 " to 3 / 8 ". These fasteners are available in collated strips of 10 . Four of these strips are loaded
1.2.2 Material Specifications
Fastener
Fastener
Fastener
Nominal fastener
designation
material
plating
hardness
X-HSN 24
Carbon Steel
5 µ m Zinc 1
55.5 HRC
1 ASTM B633 , SC 1 , Type III . Reference Section 2.3.3.1 of Hilti North American Product Technical Guide Volume 1 : Direct Fastening for more information .
1.2.3 Technical Data
Allowable pullout loads for attachments to steel base material lb ( kN ) 1 , 2 , 3
Base material thickness ( in .) Fastener
1 / 8 3 / 16 1 / 4 3 / 8 X-HSN 24 435 ( 1.95 ) 635 ( 2.82 ) 750 ( 3.34 ) 750 ( 3.34 )
1 These values represent testing performed in ASTM A36 plate steel . 2 The values must be compared with allowable tensile pullover values . 3 Allowable values based on safety factor of 5.0 . into the DX 860-HSN tool , along with the cartridge strip , and enable the operator to fasten at a rate of up to 1,000 quality fastenings per hour . Additionally , this tool offers punch through resistance in cases where the base material is inadvertently missed .
Other tools include the hand held DX 460-SM , a semi-automatic magazine tool for use on smaller jobs or in tandem with the DX 860-HSN .
Hilti X-HSN 24 steel deck fasteners comply with ANSI / SDI RD1.0 , C1.0 and NC1.0 standards .
1.2.1 Product Description 1.2.2 Material Specifications 1.2.3 Technical Data 1.2.4 Ordering Information
X-HSN 24
Approvals / Listings
ICC-ES ( International Code Council ) ESR-3592 , ESR-2776 , ESR-2197 , ESR-1116 , ESR-1735P , ESR-1414 , ESR-2408 COLA ( City of Los Angeles ) RR 25974 , RR 25877 , RR 25296 FM ( Factory Mutual ) For attaching Class 1 Steel Roof Decks with 1-60 and 1-90 wind uplift ratings .
Refer to FM RoofNav for specific assembly listings . UL ( Underwriters Laboratories ) Fasteners for attaching steel roof deck ( uplift and fire classification )
Allowable pullover and shear bearing loads for attaching steel deck 1 , 2 , 3
Fastener
Tension lb ( kN )
Steel deck gauge ( in .)
16 ( 0.0598 ) 18 ( 0.0474 ) 20 ( 0.0358 ) 22 ( 0.0295 ) 24 ( 0.0239 ) 26 ( 0.0179 ) Shear lb ( kN )
Tension lb ( kN )
Shear lb ( kN )
Tension lb ( kN )
Shear lb ( kN )
Tension lb ( kN )
Shear lb ( kN )
Tension lb ( kN )
Shear lb ( kN )
Tension lb ( kN )
Shear lb ( kN )
X-HSN 24 1 865 975 725 785 560 600 500 500 450 410 415 310 ( 3.85 ) ( 4.29 ) ( 3.22 ) ( 3.45 ) ( 2.49 ) ( 2.64 ) ( 2.22 ) ( 2.20 ) ( 2.00 ) ( 1.80 ) ( 1.85 ) ( 1.36 )
1 For base steel thickness 1 / 8 " ( 3 mm ) to 3 / 8 " ( 10 mm ). 2 Allowable values are based on a safety factor of 3.0 . 3 Loads based on ASTM A1008 , or minimum ASTM A653 SQ33 steel deck .
Hilti , Inc . ( US ) 1-800-879-8000 | www . us . hilti . com I en español 1-800-879-5000 I Hilti ( Canada ) Corp . 1-800-363-4458 I www . hilti . ca I PTG Decking Supplement 2014 25