Direct Fastening Technical Guide , Edition 24
Cable lug characteristics and connector types Cable lug thickness t cl and inner hole diameter d 2 d2
tcl
Single point connector Double point connector
Fastener
Type A Type B Type A
|
t cl
1 In . ( mm )
|
d 2 In . ( mm ) |
t cl
1 In . ( mm )
|
d 2 In . ( mm ) |
t cl
1 In . ( mm )
|
d 2 In . ( mm ) |
S-BT-ER W10 / 15 SN 6 ≤ 0.28 ( 7 )
S-BT-EF W10 / 15 AN 6 ≤ 0.28 ( 7 )
0.375 ( 9.5 ) ≤ d 2
≤ 0.53 ( 13.5 )
0.375 ( 9.5 ) ≤ d 2
≤ 0.53 ( 13.5 ) S-BT-ER W10 HC AWG2 - - ≤ 0.47 ( 12 )
S-BT-EF W10 HC AWG2 - - ≤ 0.47 ( 12 )
S-BT-ER W10 HC AWG4 / 0 - - ≤ 0.47 ( 12 )
S-BT-EF W10 HC AWG4 / 0 - - ≤ 0.47 ( 12 )
1 Design current must be considered when determining cable lug thickness .
- - ≤ 0.28 ( 7 )
- - ≤ 0.28 ( 7 )
0.375 ( 9.5 ) ≤ d 2
≤ 0.53 ( 13.5 )
0.375 ( 9.5 ) ≤ d 2
≤ 0.53 ( 13.5 )
0.375 ( 9.5 ) ≤ d 2
≤ 0.53 ( 13.5 )
0.375 ( 9.5 ) ≤ d 2
≤ 0.53 ( 13.5 )
0.375 ( 9.5 ) ≤ d 2
≤ 0.53 ( 13.5 )
0.375 ( 9.5 ) ≤ d 2
≤ 0.53 ( 13.5 ) - -
- -
- -
- -
Single point connector
Double point connector
Type A Type B Type A
≤ 7mm
≤ 7mm
3.2.6.15.4 Installation Instructions Installation Instructions For Use ( IFU ) are included with each product package . They can also be viewed or downloaded online at www . hilti . com . Because of the possibility of changes , always verify that downloaded IFU are current when used .
Proper installation is critical to achieve full performance . Training is available on request . Contact Hilti Technical Services for applications and conditions not addressed in the IFU .
93