Direct Fastening Technical Guide , Edition 24
3.2.11.4 INSTALLATION INSTRUCTIONS *
T max
1 . Press tip of fastener to concrete base material . Drive fastener with Hilti powder-actuated tool .
2 . Ensure proper threaded stud embedment .
3 . Make attachment . Do not exceed Maximum Tightening Torque , T max
.
* These are abbreviated instructions which may vary by application . ALWAYS review / follow the instructions accompanying the product .
Maximum tightening torque , T max , for threaded studs driven into concrete , ft-lb ( Nm )
X-W6
Stud type W10
3.0 ( 4.0 ) 4.5 ( 6.0 )
3.2.11.5 ORDERING INFORMATION
Fastener description
Shank length in . ( mm )
Shank Ø in . ( mm )
Thread length in . ( mm )
Thread Ø
Guidance washer Ø
Packaging quantity
X-W6-20-22 FP8 7 / 8 ( 22 ) 0.145 ( 3.7 ) 3 / 4 ( 20 ) UNC 1 / 4-inch 8 mm plastic 100 pcs X-W6-20-27 FP8 1 ( 27 ) 0.145 ( 3.7 ) 3 / 4 ( 20 ) UNC 1 / 4-inch 8 mm plastic 100 pcs X-W6-38-27 FP8 1 ( 27 ) 0.145 ( 3.7 ) 1-1 / 2 ( 38 ) UNC 1 / 4-inch 8 mm plastic 100 pcs
W10-30-27 P10 1 ( 27 ) 0.205 ( 5.2 ) 1-3 / 16 ( 30 ) UNC 3 / 8-inch 10 mm plastic 100 pcs W10-30-32 P10 1-1 / 4 ( 32 ) 0.205 ( 5.2 ) 1-3 / 16 ( 30 ) UNC 3 / 8-inch 10 mm plastic 100 pcs W10-30-42 P10 1-5 / 8 ( 42 ) 0.205 ( 5.2 ) 1-3 / 16 ( 30 ) UNC 3 / 8-inch 10 mm plastic 100 pcs
X-W6
W10 *
* W10 threaded stud installation requires a 10mm fastener base plate .
67