4.2 REFERENCE STANDARDS
4.2 REFERENCE STANDARDS
4.2.1 ICC-ES ACCEPTANCE CRITERIA
Standard Title AC10 AC43
AC70
AC118
AC230
AC368
AC499
Acceptance Criteria for Quality Documentation
Acceptance Criteria for Steel Deck Roof and Floor Systems
Acceptance Criteria for Fasteners Power-Driven into Concrete , Steel and Masonry Elements
Acceptance Criteria for Tapping Screw Fasteners
Acceptance Criteria for Power-Driven Pins for Shear Wall Assemblies with Cold-Formed Steel Framing and Wood Structural Panels
Acceptance Criteria for Suspended Ceiling Framing Systems
Acceptance Criteria for Screw-in Fasteners installed into Steel Elements
4.2.2 ASTM STANDARDS
Standard Title A36 A153
Specification for Structural Steel
Zinc Coating ( Hot-Dip ) on Iron and Steel Hardware
A449 Standard Specification for Hex Cap Screws , Bolts and Studs , Steel , Heat Treated , 120 / 105 / 90 ksi Minimum Tensile Strength , General Use
A493
A510
A572
A641
A653
A992
Specification for Stainless and Heat-resisting Steel for Cold Heading and Cold Forging Bar and Wire
Specification for General Requirements for Wire Rods and Coarse Round Wire , Carbon Steel
Standard Specification for High-Strength Low- Alloy Columbium-Vanadium Structural Steel
Standard Specification for Zinc-Coated ( Galvanized ) Carbon Steel Wire
Standard Specification for Steel Sheet , Zinc- Coated ( Galvanized ) or Zinc-Iron Alloy-Coated ( Galvanealed ) by the Hot-Dip Process
Standard Specification for Steel for Structural Shapes For Use in Building Framing
A1003 Standard Specification for Steel Sheet , Carbon , Metallic and Nonmetallic Coated for Cold Formed Framing Members
A1008
B117
B633
B695
Standard Specification for Steel , Sheet , Cold- Rolled , Carbon , Structural , High-Strength Low- Alloy , High-Strength Low-Alloy with Improved Formability , Solution Hardened and Bake Hardenable .
Standard Practice for Operating Salt Spray ( Fog ) Apparatus
Electrodeposited Coatings of Zinc on Iron and Steel
Coatings of Zinc Mechanically Deposited on Iron and Steel
Standard B695
C33 C36 C90
C150 C270
C330
C332
C476
Title
Coatings of Zinc Mechanically Deposited on Iron and Steel
Specification for Concrete Aggregates Standard Specification for Gypsum Wallboard
Specification for Load-Bearing Concrete Masonry Units
Standard Specification for Portland Cement
Standard Specification for Mortar for Unit Masonry
Specification for Lightweight Aggregates for Structural Concrete
Specification for Lightweight Aggregates for Insulating Concrete
Specification for Grout for Masonry
C635 Standard Specification for the Manufacture , Performance and Testing of Metal Suspension Systems for Acoustical Tile and Lay-in Panel Ceilings
C636
C954
C1002
C1396 C1513
Standard Practice for Installation of Metal Ceiling Suspension Systems for Acoustical Tile
and Lay-in Panels
Standard Specification for Steel Drill Screws for the Application of Gypsum Panel Products or Metal Plaster Bases to Steel Studs From 0.033 in . ( 0.84 mm ) to 0.112 in . ( 2.84 mm ) in Thickness
Standard Specification for Steel Self-Piercing Tapping Screws for the Application of Gypsum Panel Products or Metal Plaster Bases to Wood Studs or Steel Studs
Standard Specification for Gypsum Board
Standard Specification for Steel Tapping Screws for Cold-Formed Steel Framing Connections
D1761 Standard Test Methods for Mechanical Fasteners in Wood
E380
E455
E1190
Standard Practice for Use of the International System of Units , SI ( The Modernized Metric System )
Standard Specification for Pressure Vessel Plates , Carbon Steel , High-Strength Manganese
Test Methods for Strength of Powder-Actuated Fasteners Installed in Structural Members
E2126 Standard Test Methods for Cyclic ( Reversed ) Load Test for Shear Resistance of Vertical Elements of the Lateral Force Resisting Systems for Buildings
F594
Standard Specification for Stainless Steel Nuts
F844 Standard Specification for Washers , Steel , Plain ( Flat ), Unhardened for General Use
F1941
Standard Specification for Electrodeposited Coatings on Threaded Fasteners ( Unified Screw Threads , UN / UNR )
234