Direct Fastening Technical Guide , Edition 24
3.2.10.1 Product description 3.2.10.2 Material specifications 3.2.10.3 Technical data 3.2.10.4 Ordering information
X-CF
Listings / Approvals
X-CP
ICC-ES ( International Code Council ) ESR-2379 with LABC / LARC Supplement
3.2.10 SILL PLATE FASTENING SYSTEMS
3.2.10.1 PRODUCT DESCRIPTION
The 2-7 / 8 " Hilti X-CF and X-CP fasteners are specifically designed for attaching wood sill plates to concrete substrates . Hilti offers a suitable fastener for most sill plate application conditions . The carbon steel thick coated X-CP 72 P8 S23 fastener complements the Hilti powder-actuated fastener portfolio specifically for sill plate applications where pressure treated lumber is being used .
The X-CP fasteners are suitable for use with pressure treated lumber sill plates . Reference General Guidelines on top of following page for fastener recommendation dependent on environment conditions and lumber type used . The X-CP fastener has a pre-mounted 0.905 " ( 23 mm ) 16 gauge washer for faster and more reliable installation . The X-CP fastener has an additional plastic washer that minimizes coating damage by the washer during installation . These sill plate fasteners are suitable for use with Hilti ’ s powderactuated tools and cartridges .
Product features :
• Fasteners for use with chemical pressure treated lumber ( X-CP ).
• Pre-assembled washer for faster and more reliable installation .
• Washer clearly stamped with material / coating for easier inspection .
• X-CP : Additional plastic insert to minimize coating damage during installation .
Installed X-CP fastener with “ A 153 " clearly marked on washer . |
|
|
|
|
3.2.10.2 Material specifications |
|
|
|
|
Fastener designation |
Fastener material |
Washer material |
Fastener plating |
Washer plating |
X-CF 72 P8 S23 Carbon Steel Carbon Steel 5 μm Zinc 1 5 μm Zinc 1
X-CP 72 P8 S23 Carbon Steel Carbon Steel
1 ASTM B633 , SC 1 , Type III . Refer to Section 2.3.3.1 for more information . 2 Equivalent in corrosion resistance to ASTM A153 HDG . Refer to Section 2.3.3.1 for more information .
Thick Mechanical Plated 2 > 86 μm
Thick Mechanical Plated 2 > 86 μm
63