3.5.2.1 Product description 3.5.2.2 Material specifications 3.5.2.3 Technical data 3.5.2.4 Ordering information
X-HSN 24
Approvals / Listings
ICC-ES ( International Code Council ) ESR-2776 with LABC / LARC Supplement , ESR-2197 with LABC / LARC Supplement IAPMO ( Uniform Evaluation Service ) Co-listings ER-2018 , ER-0161 , ER-0329 FM ( Factory Mutual ) For attaching Class 1 Steel Roof Decks with wind uplift ratings up to 1-330 .
Refer to FM RoofNav for specific assembly listings . UL ( Underwriters Laboratories ) Fasteners for attaching steel roof deck ( uplift and fire classification )
3.5.2 . X-HSN 24 FOR FASTENING DECK TO BAR JOIST
3.5.2.1 PRODUCT DESCRIPTION
The Hilti bar joist deck fastening system consists of powder-actuated tools that are primarily used with the X-HSN 24 fasteners , which are available in a collated version .
For many bar joist decking projects , the tool of choice is the DX 9-HSN tool . This self-contained stand up decking tool is powered by 0.27 caliber short cartridges , which are loaded into the tool in strips of 40 . The cartridges drive the X-HSN 24 fasteners into almost any type of steel deck profile and base steel thicknesses of 1 / 8 " to 3 / 8 ". These fasteners are available in collated strips of 10 . Four of these strips are loaded
3.5.2.2 MATERIAL SPECIFICATIONS
Fastener designation
Fastener material
Fastener plating
Nominal fastener hardness
X-HSN 24 Carbon steel 5 ยต m zinc 1 55.5 HRC
1 ASTM B633 , SC 1 , Type III . Reference Section 2.3.3.1 for more information .
3.5.2.3 TECHNICAL DATA into the DX 9-HSN tool , along with the cartridge strip , and enable the operator to fasten at a rate of up to 1,000 quality fastenings per hour . Additionally , this tool offers punch through resistance in cases where the base material is inadvertently missed .
Other tools include the hand held DX 5-SM , a semi-automatic magazine tool for use on smaller jobs or in tandem with the DX 9-HSN .
Hilti X-HSN 24 steel deck fasteners comply with ANSI / SDI RD1.0 , C1.0 and NC1.0 standards .
Allowable pullout loads for attachments to steel base material lb ( kN ) 1 , 2 , 3
Fastener
Base material thickness ( in .)
1 / 8 3 / 16 1 / 4 3 / 8
X-HSN 24 435 ( 1.95 ) 635 ( 2.82 ) 750 ( 3.34 ) 750 ( 3.34 )
1 These values represent testing performed in ASTM A36 plate steel . 2 The values must be compared with allowable tensile pullover values . 3 Allowable values based on safety factor of 5.0 .
Allowable pullover and shear bearing loads for attaching steel deck 1 , 2 , 3
Steel deck gauge ( in .)
Fastener
16 ( 0.0598 ) 18 ( 0.0474 ) 20 ( 0.0358 ) 22 ( 0.0295 ) 24 ( 0.0239 ) 26 ( 0.0179 )
Tension lb ( kN ) |
Shear lb ( kN ) |
Tension lb ( kN ) |
Shear lb ( kN ) |
Tension lb ( kN ) |
Shear lb ( kN ) |
Tension lb ( kN ) |
Shear lb ( kN ) |
Tension lb ( kN ) |
Shear lb ( kN ) |
Tension lb ( kN ) |
Shear lb ( kN ) |
|
865 |
975 |
725 |
785 |
560 |
600 |
500 |
500 |
450 |
410 |
415 |
310 |
|
( 3.85 ) |
( 4.29 ) |
( 3.22 ) |
( 3.45 ) |
( 2.49 ) |
( 2.64 ) |
( 2.22 ) |
( 2.20 ) |
( 2.00 ) |
( 1.80 ) |
( 1.85 ) |
( 1.36 ) |
1 For base steel thickness 1 / 8 " ( 3 mm ) to 3 / 8 " ( 10 mm ). 2 Allowable values are based on a safety factor of 3.0 . 3 Loads based on ASTM A1008 , or minimum ASTM A653 SQ33 steel deck .
176