HILTI
HILTI
HILTI
3.4.2 X-FCM AND X-FCP GRATING AND CHECKERPLATE
3.4.2.1 PRODUCT DESCRIPTION
The Hilti grating fastening system consists of the X-FCM grating disk , an 8 mm powder-actuated threaded stud , and a powder-actuated tool equipped with a special grating adapter that fits through the bar grating and contacts the base steel , or an 8 mm screw-in threaded stud with S-BT system . The X-FCM grating disk is available in three lengths to accommodate grating thickness of 1 " to 2 ". Carbon steel disks are available with duplex coating ( X-FCM-F ). The stainless steel disks ( X-FCM-R ) offer the highest corrosion resistance . The 8 mm threaded studs are available in stainless steel .
The X-FCP fastening system is used to fasten flat steel floorplates with thicknesses of 1 / 4 " to 1 / 2 " to supporting steel structures . The Hilti X-FCP fastening system includes the X-FCP disk , an 8 mm powder-actuated threaded stud and a powder-actuated tool with specialized adapter . The adapter is designed to fit through a 3 / 4 " diameter pre-drilled hole in the checkerplate or other similar solid flooring material , and contact the base steel . The X-FCP disk is available in duplex coated carbon steel ( X-FCP-F ) or stainless steel ( X-FCP-R ). The 8 mm threaded studs are available in stainless steel .
Product features :
• Grating or checkerplate are fastened in place
• Topside only access needed
• Removable * and reusable *
• Corrosion resistance of stainless disks and X-ST-GR threaded studs
• Non-trip profile
• Non-slip surfaces
• No electrical or pneumatic power required
Guide specification
05500 Metal fabrications 05530 Grating
Disk : X-FCM disk shall be duplex coated carbon steel or stainless steel , which consists of an assembly of a disk and an 8 mm internally threaded screw manufactured by Hilti .
Stud : Powder-actuated threaded stud shall be X-ST-GR M8 / 10 P8 , X-BT-GR M8 / 7 SN 8 stainless steel studs , screw-in threaded stud shall be S-BT-GR M8 / 7 SN6 stainless steel studs or S-BT-GF M8 / 7 AN6 carbon steel studs for attaching the X-FCM disk .
Installation : Contact a manufacturer ’ s representative from Hilti to provide training to the operators at the project site .
05540 Floor plates
Disk : X-FCP disk shall be duplex coated carbon steel or stainless steel , which consists of an assembly of a disk and an 8 mm internally threaded screw manufactured by Hilti .
Stud : Powder-actuated threaded stud for attaching the X-FCP disk shall be X-ST-GR M8 / 5 P8 or X-ST-GR M8 / 10 P8 stainless steel studs manufactured by Hilti .
Installation : Contact a manufacturer ’ s representative from Hilti to provide training to the operators at the project site .
3.4.2.1 Product description 3.4.2.2 Material specifications 3.4.2.3 Technical data 3.4.2.4 Installation instructions 3.4.2.5 Ordering information
X-FCM
X-FCP
Listings / Approvals
ABS ( American Bureau of Shipping ) for X-FCM-R and X-FCP-R Lloyds Register for all X-FCM types and X-FCP-R DNV Certification for X-FCM-F and X-FCM-R GL ( Germanischer Lloyd ) for X-FCM-F and X-FCM-R
* Only disk part of fastener can be removed and reused . Threaded stud remains in place unless removed by overloading the fastener and not reusable .
140