1. Anchor
Channel Systems
2. HAC
Portfolio
3. HAC
Applications
4. Design
Introduction
5. Base material
6. Loading
10.3.2.5 STEEL PROFILE
7. Anchor Channel
Design Code
8. Reinforcing
Bar Anchorage
9. Special Anchor
Channel Design
10. Design
Software
11. Best
Practices
12. Instructions
for Use
13. Field Fixes
14. Design
Example
Static
Select static design if applied loads are static loads
Seismic
Select this option when designing per ACI 318-11 if anchor design included
earthquake forces for attachment into structures assigned to Seismic Design
Category C, D, E or F. Refer to the model code ACI 318-11 for specific seismic
parameters.
Steel profile
Steel profile allows adding a profile to the bracket. This is a aesthetics feature. It
does not impact the design nor does it add load eccentricities.
Feature only available with a base plate.
See section 7.6 of this brochure for additional information
10.3.2.6 LOADS
Tolerance
Tolerance: +/- 0 in
Steel profile
Analysis based on the nominal t-bolt location.
Input loads
Tolerance: +/- ch. Length
Strength Design according to ACI 318-11
Analysis based on the t-bolt location along the channel that yields the highest
utilization.
Allows the user to input the loads in a tabular format, rather than utilizing the work-
space model. Applied loads shall be Strength Level (LRFD factor – design loads)
328
Cast-In Anchor Channel Product Guide, Edition 1 • 02/2019
This field allows to select the left and right tolerance of the t-bolts along the anchor
channel. PROFIS Anchor Channel looks for the t-bolt(s) position along the anchor
channel that yields the highest utilization, unless selected otherwise.
329