1. Anchor
Channel Systems
2. HAC
Portfolio
3. HAC
Applications
4. Design
Introduction
5. Base material
6. Loading
10.3.2.2 BASE MATERIAL TAB
7. Anchor Channel
Design Code
8. Reinforcing
Bar Anchorage
9. Special Anchor
Channel Design
10. Design
Software
11. Best
Practices
12. Instructions
for Use
13. Field Fixes
14. Design
Example
Corner of Slab
• Activates pair of channels in a corner.
• Only symmetric corners are allows. For unsymmetrical
corners, use the highest loads.
• Analysis assumes both corner channels are loaded
simultaneously.
Concrete
Uncracked concrete
Top of slab corner
If analysis indicates no cracking at service load levels, the use
of uncracked concrete can be justified.
Face of slab corner
Cracked concrete
If analysis indicates cracking at service load levels.
All-lightweight concrete (ALWAC) λ = 0.75
San lightweight concrete (SLWC) λ = 0.85
Supplementary reinforcement
See section 5.1.2 for additional information.
Base material
Select the concrete cylinder compressive strength of the
substrate. Drop menu provides incremental of 1000 psi. For a
specific cylinder compressive strength, click on “Customize”
option and input the specific value.
322
Cast-In Anchor Channel Product Guide, Edition 1 • 02/2019
323