DESIGN DATA IN CONCRETE PER ACI 318
ACI 318 Chapter 17 design
The load values contained in this section are Hilti Simplified Design Tables . The load tables in this section were developed using the Strength Design parameters and variables of ESR-4372 and the equations within ACI 318 Chapter 17 . For a detailed explanation of the Hilti Simplified Design Tables , refer to section 3.1.8 . Data tables from ESR-4372 are not contained in this section , but can be found at www . icc-es . org or at www . hilti . com .
Hilti HVU2 Adhesive Capsule with Hilti HAS Threaded Rod
Hilti HAS threaded rod with setting tip
Figure 1 — Hilti HAS threaded rod installation conditions
Permissible Base Material |
Uncracked concrete
Cracked concrete
|
Dry Concrete
Water-saturated concrete
|
Permissible Drilling Method |
Hammer drilling with carbide tipped drill bit
Hilti TE-CD or TE-YD Hollow Drill Bit
Diamond core drilling
|
Table 1 — Hilti HAS threaded rod installation specifications 1
Setting information Symbol Units
Nominal rod diameter ( in .) 3 / 8 1 / 2 5 / 8 3 / 4 7 / 8 1 1-1 / 4 2 d o
- 7 / 16 ” 9 / 16 ” 11 / 16 ” 7 / 8 ” 1 ” 1-1 / 8 ” 1-3 / 8 ”
Nominal bit diameter d o
- 12mm 9 / 16 ” 11 / 16 ” 7 / 8 ” 1 ” 1-1 / 8 ” 1-3 / 8 ” d o
- - 9 / 16 ” 11 / 16 ” 7 / 8 ” 1 ” 1-1 / 8 ” 1-3 / 8 ”
Effective embedment h ef in . 3-1 / 2 4-1 / 4 5 6-5 / 8 6-5 / 8 8-1 / 4 11
( mm ) ( 89 ) ( 108 ) ( 127 ) ( 168 ) ( 168 ) ( 210 ) ( 279 ) Diameter of fixture hole d f in . 7 / 16 9 / 16 11 / 16 13 / 16 15 / 16 1-1 / 8 1-3 / 8
Installation torque T inst ft-lb 15 30 60 100 125 150 200 ( Nm ) ( 20 ) ( 41 ) ( 81 ) ( 136 ) ( 169 ) ( 203 ) ( 271 )
Minimum concrete thickness h min in . 4-3 / 4 5-1 / 2 6-3 / 8 8-3 / 8 8-5 / 8 10-1 / 2 13-3 / 4 ( mm ) ( 121 ) ( 140 ) ( 162 ) ( 213 ) ( 219 ) ( 267 ) ( 349 )
Minimum edge distance c min in . 1-7 / 8 2-1 / 2 3-1 / 8 3-1 / 4 4-3 / 8 5 6-1 / 4 ( mm ) ( 48 ) ( 64 ) ( 79 ) ( 95 ) ( 111 ) ( 127 ) ( 159 )
Minimum anchor spacing s min in . 1-7 / 8 2-1 / 2 3-1 / 8 3-1 / 4 4-3 / 8 5 6-1 / 4 ( mm ) ( 48 ) ( 64 ) ( 79 ) ( 95 ) ( 111 ) ( 127 ) ( 159 )
1 Material specifications for Hilti HAS threaded rods are listed in section 3.2.7 . 2 1-1 / 4-in . diameter threaded rods to be installed in generally vertical down direction only .
Figure 2 — Hilti HAS threaded rods installed with Hilti HVU2 adhesive capsule
234 Anchor Fastening Technical Guide Edition 22 | 3.0 ANCHORING SYSTEMS | 3.2.6 HVU2 CAPSULE ADHESIVE ANCHORING SYSTEM Hilti , Inc . 1-800-879-8000 | en español 1-800-879-5000 | www . hilti . com | Hilti ( Canada ) Corporation | www . hilti . ca | 1-800-363-4458