Product Technical Guides : US-EN Anchor Fastening - August 2021 | Page 158

Table 74 — Hilti HIT-RE 500 V3 adhesive factored resistance with concrete / bond failure for threaded rod in cracked concrete ^{1 , 2 , 3 , 4 , 5 , 6 , 7 , 8 , 9 , 11}

Nominal anchor diameter in .

3 / 8

1 / 2

5 / 8 ¹⁰

3 / 4 ¹⁰

7 / 8 ¹⁰

1 ¹⁰

1-1 / 4 ¹⁰

Effective embedment in . ( mm ) _{ƒ ́c} = 20 MPa ( 2,900 psi ) lb ( kN ) _{ƒ ́c} = 25 MPa ( 3,625 psi ) lb ( kN )

Tension N _r

_{ƒ ́c} = 30 MPa ( 4,350 psi ) lb ( kN ) _{ƒ ́c} = 40 MPa ( 5,800 psi ) lb ( kN ) _{ƒ ́c} = 20 MPa ( 2,900 psi ) lb ( kN ) _{ƒ ́c} = 25 MPa ( 3,625 psi ) lb ( kN )

154

Anchor Fastening Technical Guide Edition 22 | 3.0 ANCHORING SYSTEMS | 3.2.3 HIT-RE 500 V3 EPOXY ADHESIVE ANCHORING SYSTEM Hilti , Inc . 1-800-879-8000 | en español 1-800-879-5000 | www . hilti . com | Hilti ( Canada ) Corporation | www . hilti . ca | 1-800-363-4458

Shear V _r

_{ƒ ́c} = 30 MPa ( 4,350 psi ) lb ( kN ) _{ƒ ́c} = 40 MPa ( 5,800 psi ) lb ( kN )

1 See Section 3.1.8 for explanation on development of load values . 2 See Section 3.1.8 to convert design strength value to ASD value . 3 Linear interpolation between embedment depths and concrete compressive strengths is not permitted . 4 Apply spacing , edge distance , and concrete thickness factors in tables 30-41 as necessary to the above values . Compare to the steel values in table 29 to the above values . The lesser of the values is to be used for the design .

5 Data is for temperature range A : Max . short term temperature = 130 ° F ( 55 ° C ), max . long term temperature = 110 ° F ( 43 ° C ). For temperature range B : Max . short term temperature = 176 ° F ( 80 ° C ), max . long term temperature = 110 ° F ( 43 ° C ) multiply above values by 0.69 . Short term elevated concrete temperatures are those that occur over brief intervals , e . g ., as a result of diurnal cycling . Long term concrete temperatures are roughly constant over significant periods of time .

6 Tabular values are for dry or water saturated concrete conditions . For water-filled drilled holes multiply design strength by 0.51 . For submerged ( under water ) applications multiply design strength by 0.44 . 7 Tabular values are for short term loads only . For sustained loads including overhead use , see Section 3.1.8 . 8 Tabular values are for normal-weight concrete only . For lightweight concrete multiply design strength by λ _a as follows :

For sand-lightweight , λ _a = 0.51 . For all-lightweight , λ _a

= 0.45 . 9 Tabular values are for holes drilled in concrete with carbide tipped hammer drill bit . Diamond core drilling is not permitted in cracked concrete except as indicated in note 10 . 10 Diamond core drilling with Hilti TE-YRT roughening tool is permitted for 5 / 8 ", 3 / 4 ", 7 / 8 ", 1 ", and 1-1 / 4 ". See Table 77 . 11 Tabular values are for static loads only . For seismic loads , multiply cracked concrete tabular values by α _seis indicated below . See section 3.1.8 for additional information on seismic applications . 3 / 8-in . diameter - α _seis

= 0.69

1 / 2-in . diameter - α _seis = 0.70

5 / 8-in . diameter - α _seis

= 0.71 3 / 4-in . diameter and larger - α _seis

= 0.75