Anchor Fastening Technical Guide , Edition 22
MATERIAL SPECIFICATIONS
Table 1 — Material properties of fully cured Hilti HIT-RE 500 V3
Bond Strength ASTM C882-13A 1 2 day cure 14 day cure
10.8 MPa 11.7 MPa
1,560 psi 1,690 psi
Compressive Strength ASTM D695-10 1
|
82.7 MPa |
12,000 psi |
Compressive Modulus ASTM D695-10 1
|
2,600 MPa |
0.38 x 10 6 psi |
Tensile Strength 7 day ASTM D638-14 |
49.3 MPa |
7,150 psi |
Elongation at break ASTM D638-14 |
1.1 % |
1.1 % |
Heat Deflection Temperature ASTM D648-07 |
50 ° C |
122 ° F |
Absorption ASTM D570-98 |
0.18 % |
0.18 % |
Linear Coefficient of Shrinkage on Cure ASTM D2566-86 |
0.008 |
0.008 |
1 Minimum values obtained as the result of tests at 35 ° F , 50 ° F , 75 ° F and 110 ° F . |
|
|
3.2.3
DESIGN DATA IN CONCRETE FOR ACI 318
ACI 318 Chapter 17 design
The load values contained in this section are Hilti Simplified Design Tables . The load tables in this section were developed using the strength design parameters and variables of ESR-3814 and the equations within ACI 318 Chapter 17 . For a detailed explanation of the Hilti Simplified Design Tables , refer to Section 3.1.8 . Data tables from ESR-3814 are not contained in this section , but can be found at www . icc-es . org or at www . hilti . com .
Anchor Fastening Technical Guide Edition 22 | 3.0 ANCHORING SYSTEMS | 3.2.3 HIT-RE 500 V3 EPOXY ADHESIVE ANCHORING SYSTEM Hilti , Inc . 1-800-879-8000 | en español 1-800-879-5000 | www . hilti . com | Hilti ( Canada ) Corporation | www . hilti . ca | 1-800-363-4458
107