Anchor Fastening Technical Guide , Edition 22
HIT-HY 200 A / R V3 Adhesive with Hilti HAS Threaded Rod
3.2.2
Table 81 — Steel factored resistance for Hilti HAS threaded rods for use with CSA A23.3 Annex D
HAS-V-36 / HAS-V-36 HDG ASTM F1554 Gr . 36 4 , 6
|
HAS-E-55 / HAS-E-55 HDG ASTM F1554 Gr . 55 4 , 6
|
HAS-B-105 / HAS-B-105 HDG ASTM A193 B7 and ASTM F 1554 Gr . 105 4 , 6
|
HAS-R stainless steel ASTM F593 ( 3 / 8-in to 1-in ) 5 ASTM A193 ( 1-1 / 8-in to 2-in ) 4
|
Nominal anchor diameter in .
3 / 8
1 / 2
5 / 8
3 / 4
7 / 8
1
1-1 / 4
Tensile 1
ФN sar lb ( kN )
Shear 2
ФV sar lb ( kN )
Seismic
Shear 3
ФV sar , eq lb ( kN )
Tensile 1
ФN sar lb ( kN )
Shear 2
ФV sar lb ( kN )
Seismic
Shear 3
ФV sar , eq lb ( kN )
Tensile 1
ФN sar lb ( kN )
Shear 2
ФV sar lb ( kN )
Seismic
Shear 3
ФV sar , eq lb ( kN )
Tensile 1
ФN sar lb ( kN )
Shear 2
ФV sar lb ( kN )
3,055 1,720 1,030 3,955 2,225 1,560 6,570 3,695 2,585 4,610 2,570 1,800 ( 13.6 ) ( 7.7 ) ( 4.6 ) ( 17.6 ) ( 9.9 ) ( 6.9 ) ( 29.2 ) ( 16.4 ) ( 11.5 ) ( 20.5 ) ( 11.4 ) ( 8.0 ) 5,595 3,150 1,890 7,240 4,070 2,850 12,035 6,765 4,735 8,445 4,705 3,295 ( 24.9 ) ( 14.0 ) ( 8.4 ) ( 32.2 ) ( 18.1 ) ( 12.7 ) ( 53.5 ) ( 30.1 ) ( 21.1 ) ( 37.6 ) ( 20.9 ) ( 14.7 ) 8,915 5,015 3,010 11,525 6,485 4,540 19,160 10,780 7,545 13,445 7,490 5,245 ( 39.7 ) ( 22.3 ) ( 13.4 ) ( 51.3 ) ( 28.8 ) ( 20.2 ) ( 85.2 ) ( 48.0 ) ( 33.6 ) ( 59.8 ) ( 33.3 ) ( 23.3 ) 13,190 7,420 4,450 17,060 9,600 6,720 28,365 15,955 11,170 16,920 9,425 6,600 ( 58.7 ) ( 33.0 ) ( 19.8 ) ( 75.9 ) ( 42.7 ) ( 29.9 ) ( 126.2 ) ( 71.0 ) ( 49.7 ) ( 75.3 ) ( 41.9 ) ( 29.4 ) 18,210 10,245 6,145 23,550 13,245 9,270 39,150 22,020 15,415 23,350 13,010 9,105 ( 81.0 ) ( 45.6 ) ( 27.3 ) ( 104.8 ) ( 58.9 ) ( 41.2 ) ( 174.1 ) ( 97.9 ) ( 68.6 ) ( 103.9 ) ( 57.9 ) ( 40.5 ) 23,890 13,440 8,065 30,890 17,380 12,165 51,360 28,890 20,225 30,635 17,065 11,945 ( 106.3 ) ( 59.8 ) ( 35.9 ) ( 137.4 ) ( 77.3 ) ( 54.1 ) ( 228.5 ) ( 128.5 ) ( 90.0 ) ( 136.3 ) ( 75.9 ) ( 53.1 ) 38,225 21,500 12,900 49,425 27,800 19,460 82,175 46,220 32,355 37,565 21,130 12,680 ( 170.0 ) ( 95.6 ) ( 57.4 ) ( 219.9 ) ( 123.7 ) ( 86.6 ) ( 365.5 ) ( 205.6 ) ( 143.9 ) ( 167.1 ) ( 94.0 ) ( 56.4 )
1 Tensile = A se , N ϕ f uta
R as noted in CSA A23.3 Eq . D . 2 .
2 Shear = A se , V ϕ 0.60 f uta
R as noted in CSA A23.3 Eq . D . 31 .
3 Seismic Shear = α V , seis
V sar
: Reduction factor for seismic shear only . See CSA A23.3 Annex D for additional information on seismic applications . 4 HAS-V , HAS-E ( 3 / 8-in to 1-1 / 4-in ), HAS-B , and HAS-R ( Class 1 ; 1-1 / 4-in ) threaded rods are considered ductile steel elements ( including HDG rods ). 5 HAS-R ( CW1 and CW2 ; 3 / 8-in to 1-in ) threaded rods are considered brittle steel elements . 6 3 / 8-inch dia . threaded rods are not included in the ASTM F1554 standard . Hilti 3 / 8-inch dia . HAS-V , HAS-E , and HAS-E-B ( incl . HDG ) threaded rods meet the chemical composition and mechanical property requirements of ASTM F1554 .
Seismic
Shear 3
ФV sar , eq lb ( kN )
Anchor Fastening Technical Guide Edition 22 | 3.0 ANCHORING SYSTEMS | 3.2.2 HILTI HIT-HY 200 A / R V3 Hilti , Inc . 1-800-879-8000 | en español 1-800-879-5000 | www . hilti . com | Hilti ( Canada ) Corporation | www . hilti . ca | 1-800-363-4458
83