4.0 REFERENCE
4.1 REFERENCE STANDARDS
4.1.1 ASTM STANDARDS FOR MATERIALS
Standard A36 A193
A307
A370
A563
A615
A653
B117
B695
C31
C33 C34
C39
C42
C62
C90
C150
Title Standard Specification for Structural Steel
Standard Specification for Alloy-Steel and Stainless Steel Bolting Materials for High- Temperature Service
Standard Specification for Carbon Steel Bolts and Studs , 60,000 psi Tensile Strength
Standard Test Methods and Definitions for Mechanical Testing of Steel Products
Standard Specification for Carbon and Alloy Steel Nuts
Standard Specification for Deformed and Plain Carbon-Steel Bars for Concrete Reinforcement
Standard Specification for Steel Sheet , Zinc- Coated ( Galvanized ) or Zinc-Iron Alloy-Coated ( Galvannealed ) by the Hot-Dip Process
Standard Practice for Operating Salt Spray ( Fog ) Apparatus
Specifications for Coatings of Zinc Mechanically Deposited on Iron and Steel
Standard Practice for Making and Curing Concrete Test Specimens in the Field
Standard Specification for Concrete Aggregates
Standard Specification for Structural Clay Load- Bearing Wall Tile
Standard Test Method for Compressive Strength of Cylindrical Concrete Specimens
Standard Test Method for Obtaining and Testing Drilled Cores and Sawed Beams of Concrete
Standard Specification for Building Brick ( Solid Masonry Units Made from Clay or Shale )
Standard Specification for Load-Bearing Concrete Masonry Units
Standard Specification for Portland Cement
Standard Title
C270 Standard Specification for Mortar for Unit Masonry
C330 Standard Specification for Lightweight Aggregates for Structural Concrete
C332 Standard Specification for Lightweight Aggregates for Insulating Concrete
C652 Standard Specification for Hollow Brick ( Hollow Masonry Units Made from Clay or Shale )
C881 Standard Specification for Epoxy-Resin-Base Bonding Systems for Concrete
C882 Standard Test Method for Bond Strength of Epoxy-Resin Systems Used with Concrete by Slant Shear
C942 Standard Test Method for Compressive Strength of Grouts for Preplaced-Aggregate Concrete in the Laboratory
D638 Standard Test Method for Tensile Properties of Plastics
D648 Standard Test Method for Deflection Temperature of Plastics Under Flexural Load in the Edgewise Position
D695 Standard Test Method for Compressive Properties of Rigid Plastics
E8 Standard Test Methods for Tension Testing of Metallic Materials
E119 Standard Test Methods for Fire Tests of Building Construction and Materials
E488 Standard Test Methods for Strength of Anchors in Concrete Elements
E1190 Standard Test Methods for Strength of Power-Actuated Fasteners Installed in Structural Members
E1512 Standard Test Methods for Testing Bond Performance of Bonded Anchors
F436 Standard Specification for Hardened Steel Washers
F593 Standard Specification for Stainless Steel Bolts , Hex Cap Screws and Studs
F594 Standard Specification for Stainless Steel Nuts
F606 Standard Test Methods for Determining the Mechanical Properties of Externally Threaded Fasteners , Washers , Direct Tension Indicators , and Rivets
F844 Standard Specification for Washers , Steel , Plain ( Flat ), Unhardened for General Use
F1554 Standard Specification for Anchor Bolts , 36 , 55 , and 105-ksi Yield Strength
F1941-16 Electrodeposited Coatings on Mechanical Fasteners
G85 Standard Practice for Modified Salt Spray ( Fog ) Testing
4.1.2 ASTM PLATING STANDARDS
Standard A153
B633
B695
Title
Standard Specification for Zinc Coating ( Hot- Dip ) on Iron and Steel Hardware
Standard Specification for Electrodeposited Coatings of Zinc on Iron and Steel
Standard Specification for Coatings of Zinc Mechanically Deposited on Iron and Steel
488 Anchor Fastening Technical Guide Edition 22 | 4.0 REFERENCE | 4.1 APPROVALS AND LISTINGS Hilti , Inc . 1-800-879-8000 | en español 1-800-879-5000 | www . hilti . com | Hilti ( Canada ) Corporation | www . hilti . ca | 1-800-363-4458