INTRODUCING HILTI SAFESET™ TECHNOLOGY
Reliably set anchors and rebar in cracked and uncracked concrete and grout filled masonry
NO CLEANING REQUIRED
HIT-Z Anchor Rods The new Hilti HIT-Z Anchor Rod with its cone-shaped helix works as a torque-controlled bonded anchor . This means that because of their shape , HIT-Z Anchor Rods are not affected by uncleaned , hammer-drilled holes in dry or water saturated concrete in base materials above 41 ° F ( 5 ° C ) when used with HIT-HY 200 A / R V3 . The benefits are clear : fewer steps and extremely high reliability in anchoring applications .
HOLES THAT CLEAN THEMSELVES
Hollow Drill Bits Hilti TE-CD and TE-YD Hollow Drill Bits , in conjunction with HIT-HY 200 A / R V3 , HIT-RE 500 V3 , HIT-HY 100 , HIT-RE 100 , HIT-HY 270 , and HIT-ICE and the Hilti VC 150 series or the VC 300 vacuums , make subsequent hole cleaning completely unnecessary . Dust is removed by the Vacuum System while drilling is in progress for more reliability and a virtually dustless working environment .
DUST CONTROL
CORE DRILLED HOLES IN CRACKED CONCRETE
Roughening Tool Hilti HIT-RE 500 V3 with the TE-YRT roughening tool in addition to the HIT-HY 200 A / R V3 adhesive with the HIT-Z rod are the only ICC-ES approved systems in cracked concrete to make installation in core drilled holes easier , more productive , and greater reliability .
Fast cure portfolio Slow cure portfolio Masonry
HIT-HY 200 A / R V3 HIT-HY 100 HIT-ICE HIT-RE 500 V3 HIT-RE 100 HIT-HY 270
Proven performance
ICC-ES / IAMPO Evaluation Report
ESR-4868 , ESR-4878
Base material Uncracked concrete , cracked concrete , Grout-filled CMU
Recommended application
Gel time at 72˚F
Cure time at 72˚F
Anchor and rebar
HY-200-A V3 : 4 min HY-200-R V3 : 9 min
HY-200-A V3 : 30 min HY-200-R V3 : 60 min
ESR-3574 ES 547
Uncracked concrete , cracked concrete , Grout-filled CMU
Day-to-day anchor and rebar
N / A |
ESR-3814 |
ESR-3829 |
ESR 4143 , |
|
|
|
ESR 4144 |
Uncracked concrete , cracked concrete , Grout-filled CMU
Low temperature applications
Uncracked concrete , cracked concrete
Anchor and rebar
Uncracked concrete , cracked concrete
Day-to-day anchor and rebar
All masonry
All anchoring and rebar in masonry
5 min 2.5 min 25 min 30 min 2 min
30 min 45 min 6.5 hours 12 hours 30 min
Drilling method
*
* Diamond coring is an approved drilling method when used with the HIT-Z rod .
32 Anchor Fastening Technical Guide Edition 22 | 3.0 ANCHORING SYSTEMS | 3.2.1 ANCHORING SYSTEMS OVERVIEW Hilti , Inc . 1-800-879-8000 | en español 1-800-879-5000 | www . hilti . com | Hilti ( Canada ) Corporation | www . hilti . ca | 1-800-363-4458