|
Fastener notes :
● = Single M = Collated fasteners ( magazine required ) P8 = 8 mm fastener guide required P10 = 10 mm fastener guide required
|
|
|
|
|
|
|
DX 351 |
DX 2 |
DX 5 / DX460 |
GX 120 ME |
DX 600N |
2021 Direct Fastening Technical Guide |
Fastener
Application
X-W6 – 1 / 4 " Threaded Stud Installation of electrical clips and clamps , lamps and lighting as well as switch boxes and control cabinets
W10 – 3 / 8 " Threaded Stud
Available in stainless steel
Section numbers
Page numbers
P8 P8 P8 3.2.11 65 – 67
Holder brackets , pipe hangers and cable trays , to concrete P10 ● 3.2.11 65 – 67
X-EW6H – 1 / 4 " Threaded Stud
Fastening of light brackets , electrical clamps , rings and channels to steel
P8 P8 P8 3.2.12 68 – 70
X-EW10H – 3 / 8 " Threaded Stud
Fastening pipe hangers , cable trays , air ducts , brackets and channels to steel
P10 ● 3.2.12 68 – 70
X-ST-GR Threaded Stud |
High hardness threaded stud with increased application limit for fastenings to steel base materials for outdoor environments in mildly corrosive conditions |
● 3.2.13 71 – 73 |
X-BT-MR / X-BT-GR Threaded Stud |
Fastening pipe hangers , cable trays , air ducts , brackets and channels to steel . Also used as electrical grounding stud . |
● BT Tool |
3.2.12 3.2.14 |
68 – 70 74 – 82 |
X-BT ER Threaded Stud |
Stainless stud assembly for electrical connection under permanent current , short-circuit current , or lightning current conditions |
● BT Tool |
3.2.14.7 79 – 82 |
X-RH Rod Hanger
For suspending electrical metal tubing ( EMT ) from concrete or steel
● ● ● 3.2.17 102 – 111
X-HS Threaded Rod Hanger
For suspending ceilings , sprinkler pipes , mechanical ( HVAC ) and electrical components with 1 / 4 " and 3 / 8 " threaded rods
● ● ● 3.2.17 102 – 111
X-HS MX Threaded Rod Hanger
X-EMTC / BX Conduit and Cable Clip
X-EMTC / BX MX Conduit and Cable Clip
Hanger system using 1 / 4 " threaded rod for light cable trays , etc . ● ● ● 3.2.17 102 – 111
Thin wall conduit and armored cable clips with pre-mounted fasteners ● ● ● 3.2.17 102 – 111
Thin wall conduit and armored cable clips for use with magazine tools ● ● ● 3.2.17 102 – 111
* S-BT does not require powder-actuated tool for installation ; see product section for specific installation tools .
28