1. Anchor
Channel Systems
2. HAC
Portfolio
3. HAC
Applications
4. Design
Introduction
5. Base material
6. Loading
HBC
Hilti Channel Bolt
➍
➎
➋
Type
➏
➌
10. Design
Software
11. Best
Practices
12. Instructions
for Use
13. Field Fixes
14. Design
Example
2.2.1 HAC
Steel grade
➍
Finish or material
Bolt type
➎
Diameter
➏
Length
Bolt diameter in mm Bolt length in mm
8.8 F (HDG) M12 50 [1.97 in.]
(E2) HBC C 50 R (stainless steel) M16 60 [2.36 in.]
(E3) HBC C-N 8.8 F (HDG) M16 80 [3.15 in.]
(E4) HBC T 8.8 F (HDG) M16 60 [2.36 in.]
HAC-50 HAC-60
HAC-40
HAC-70
Figure 2.2.1.1 HAC profiles with matching channel bolts
Non-standard anchor channels (i.e. custom channel length,
custom anchor spacing, etc.) can be provided upon request.
Longer lead times can be expected for custom channels. See
sections 2.4, 2.5, and 2.6 for standard and custom anchor
channels lead times.
Example 2 (E2): HBC- C 50 R M16x 60
➊ ➋ ➌ ➍ ➎ ➏
Example 1 (E1): HBC- C 8.8 F M12x 50
➊ ➋ ➌ ➍ ➎ ➏
The standard HAC portfolio consists of pre-defined channel
lengths, embedment depths, number of anchors, anchor
spacing, and defined anchor diameter. Figure 2.2.1.2 illustrates
standard HAC-40 to HAC-70 anchor channels. Table 2.2.1.1
provides geometric parameters of HAC portfolio.
C HBC-C-N
HBC HBC-C (E1)
Hilti Anchor Channels (HAC) with smooth channel lips are
offered in an array of four channel profile sizes; HAC-40,
HAC-50, HAC-60, and HAC-70. Hilti Channel Bolts C (HBC-C)
are suitable for all four HAC profiles. Hilti Locking Channel Bolts
(HBC-C-N) provide slip resistances via interlocking between
t-bolt head and channel lip. Figure 2.2.1.1 illustrates the different
channel profile sizes and t-bolt types.
➊
➌
9. Special Anchor
Channel Design
HBC-Type Steel grade Finish, diameter x length
➋
8. Reinforcing
Bar Anchorage
2.2 HAC GEOMETRIC PARAMETERS
Nomenclature of Hilti Channel Bolts
➊
7. Anchor Channel
Design Code
Matching with smooth lip channel profile only
Example 3 (E3): HBC- C-N 8.8 F M16x 80
➊
➋ ➌ ➍ ➎ ➏
Matching with smooth lip channel profile only
Example 4 (E4): HBC- T 8.8 F M16x 60
➊ ➋ ➌ ➍ ➎ ➏
Matching with smooth lip channel profile only
Matching with serrated lip channel profile only
HAC-50
HAC-60
HAC-70
Figure 2.2.1.2 — Section view of HAC-40, HAC-50, HAC-60, and HAC-70.
44
Cast-In Anchor Channel Product Guide, Edition 1 • 02/2019
45
HAC-40